E83 and E85/86 DSP amps are exactly the same in hardware. They just change the outputs depending on coding.
The rear door speakers are used...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
50 results in 0.0100 seconds.
Keywords
Members
Tags
-
I used the normal E46 wiring harness and simply added the K-Line wire and pin that I spliced from the CD changer connector. I also made a new loom where...
- Likes 1
Leave a comment:
-
Yes, I had an X Brace installed in the car which was blocking the original install place. I will move it there when the new touring specific brace is...
- Likes 1
Leave a comment:
-
In most cases the connector is missing, but you can simply salvage one from an old CD changer like I did. Its pretty easy, just make sure to preheat the...
Leave a comment:
-
Awesome work! Its nice to see more people diving into this. I have some IDA disassemblies of MSS54 from the CAN bus analysis, I dig them out and send...
- Likes 2
Leave a comment:
-
Isnt the BMW "Motorsport" part just a simple Normaquick V2 blind plug? https://www.schellen-shop.de/Schlauc...UICK/NORMAQUIC...
- Likes 2
Leave a comment:
-
Does anyone know where the speedometer end value is stored in the cluster dump? I found 0xB4 and 0xB5 to be LoHi HEX*10 = rpm
Coding index...
Leave a comment:
-
To access KBUS modules without the cluster, you can add "MODE=KBUS" to your obd.ini file.
I personally would...Last edited by sda2; 06-03-2024, 07:06 AM.
- Likes 1
Leave a comment:
-
No, only the DSP and CD Changer (or Bluebus) are connected via digital connection. Everything else is analog and comes from BM54. In theory though, you...
Leave a comment:
-
Now add some M3 Touring and Sedan style side panel <3
- Likes 1
Leave a comment:
-
Might be of interest for MSS60 and MSS65 hardware comparision.
...
Leave a comment:
-
Since the audience here is a bit more into ECUs, i think its a good thread to place this.
MSS70 seems to use the same MAF signal conversion...
- Likes 2
Leave a comment:
Leave a comment: