Announcement
Collapse
No announcement yet.
Search Result
Collapse
38 results in 0.0065 seconds.
Keywords
Members
Tags
-
Oh for God's sake man, now you're really reaching. Your whole argument is this, I'm not playing with my toy the way you would like me to play with my...
-
What's ironic? Everything will be in the best possible condition, installing new rings doesn't guarantee you better numbers, I've seen rebuilt engines...
- Likes 1
Leave a comment:
-
I have done 95% of the whole shooting match, the other 5%, the rings and cylinder walls don't need restoring.
A dry compression test showed 185...
Leave a comment:
-
If you look at tearing down and rebuilding an engine as a difficult, arduous task then I can see why you might say that but for me it is great fun. I...
- Likes 3
Leave a comment:
-
I got zero history with the car when I bought it last year with 91,000 mi on the clock, the compression was excellent but I had to see what was going...
- Likes 1
Leave a comment:
-
Glyco main bearings is what I used, the clearance for all of them was about .030mm so right in the middle of the tolerance.
The side bearings on...1 Photo
- Likes 1
Leave a comment:
-
Good question, they weren't BMW, I'll have to have a look at the order....
Leave a comment:
-
Just to close off this thread, here are the pics of the conrod and main bearings when it was torn down, not bad shape at all but it was worth checkin...3 Photos
- Likes 2
Leave a comment:
-
Valve lift on 288/280 cams
I'm close to ordering 288/280 12.5mm lift cams for my S54, probably go with Schrick but I can't find a definitive answer on whether 12.5mm lift will...
-
Thanks guys, that's what I was thinking too but needed to hear it from someone else.
Leave a comment:
-
Possible rebuild of an S54 in an E86 Z4M Coupe
Hi guys,
Hopping I can ask some advice from the engine builders here.
The car is an E86 Z4M coupe, 91,000mi on the S54 B32 engine, just bought...2 Photos
-
Just to add to this list, I've used this tool to align 4 different cars now and I find it to be very accurate, the first 2 cars I used it on I also took...
Leave a comment:
-
I remembered I had done some work near the camshaft sensor recently so went back to have a look around and found the plug to the cam sensor had worked...
Leave a comment:
-
Thanks guys.
MpowerE36 , the oem tune is long gone, had the ECU cleaned of all the extra features that weren't absolutely necessary by Kassel Performance...
Leave a comment:
-
Reading codes I can't find a definition for
2001 e46 M3
I have a Creator C501 reader and I'm getting the following codes.
A1 Function, Knock Control
0A Signal camshaft...
Leave a comment: