If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Careful with the rear fitment as that wheel/tire setup can start to rub and remove paint from the rear inner fender lip. A friend had PSS10s with stockish camber and a 275/30 PSS on a 10 ET27 wheel and it rubbed the paint in that area. The tire sidewall did not show any indication of heavy rubbing.
Its so strange to me how so many have trouble running a 10” et25 with a 275 in the rear now… I’ve run various wheels in this size with a bunch of different tires since approx 2009, and never come close to rubbing. Car used to be slammed too and no issues. Fenders are untouched as well
I went from PSS to the Firehawks due to a flat, and couldn’t source PS4S at the time, but the PSS had plenty of clearance. I could probably run a 5mm spacer and still clear. I’m around -2 degrees camber in the rear
Probably will be doing an event with event with MVP this coming November. I have been to Road Atlanta a ton of times and love the track. Going there to watch Petit LeMans for the 14th consecutive time. 👍
Probably will be doing an event with event with MVP this coming November. I have been to Road Atlanta a ton of times and love the track. Going there to watch Petit LeMans for the 14th consecutive time. 👍
Great time of year to go. It's definitely much cooler.
I'll do at least one more track event before the season ends. Considering Track Advantage at VIR, Nov 6-7.
Comment