Epoxy/Rivet Vince Bar - Epoxy options besides Araldite 2014

[D-O]

I cannot seem to find anyone that has the recommended Araldite 2014 epoxy in stock. Can anyone recommend some suitable alternatives?

Thanks.

Jesse

[Obioban]

I cannot seem to find anyone that has the recommended Araldite 2014 epoxy in stock. Can anyone recommend some suitable alternatives?

Thanks.

Jesse

I ended up using a 3M product designed for the same purpose. If nobody has replied by this weekend, I can get the PN for you then.

[D-O]

Maybe 08115 Panel Bonding Adhesive?

[Sid_E46]

https://www.amazon.com/gp/product/B000PEW4MI/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

This is what I used.

[D-O]

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

This is what I used.

Worked out okay?

What part of Atlanta are you in. I am in Marietta.

Jesse

[Sid_E46]

Worked out okay?

What part of Atlanta are you in. I am in Marietta.

Jesse

Worked out great for me, used it on the underside plates as well. There are a couple of pictures in my journal of my Vince Bar install.

https://nam3forum.com/forums/forum/m...grey-speed-run

I'm usually in Alpharetta but currently stay in Marietta for school.

Do you happen to be the guy driving that super clean Imola E46 M3 around here? I see that car quite often in Marietta.

[D-O]

Nope. Silver Grey in East Cobb.

[Sid_E46]

Nope. Silver Grey in East Cobb.

Nice, do you ever come to any of the CCA meets? Haven't seen many other silver greys in ATL.

[D-O]

BMW CCA? No. Where and when?

What lead you to the 3M product?

Jesse

[Sid_E46]

BMW CCA? No. Where and when?

What lead you to the 3M product?

Jesse

3rd Sunday of every month at the North Point Barnes and Nobles. Starts at around 9 AM I believe.

I used the 3M stuff since it's just a name I recognize, and have had a bunch of quality products from them..... I have family that works for them as well.

[Obioban]

I've never been disappointed with a 3M product.

[D-O]

I've never been disappointed with a 3M product.

Me either. I just don't have the expertise to select the correct 3M product.

[D-O]

3rd Sunday of every month at the North Point Barnes and Nobles. Starts at around 9 AM I believe.

I used the 3M stuff since it's just a name I recognize, and have had a bunch of quality products from them..... I have family that works for them as well.

I have had good luck with 3M as well, but there are a lot of options from them. I appreciate your help.

The BN is close to where I work. I will need to get out there to a meet once I get her put back together.

Jesse

[nuc1]

Maybe 08115 Panel Bonding Adhesive?

That's what I used in 2012 to put in my lower plates. Zero issues since.

Mike

[K-Dawg]

How much epoxy have you guys needed to install a Vincebar and Vinceskinz?

Araldite 2014 is currently available in 50ml cartridges. It would end up being a little more expensive than 3M 08115, but it is what Vince recommends.

Vince also recommended the 200ml cartridge. Besides cost, is there any reason to not use 50ml cartridges?