S54 Dyno Database

[stash1]

Kassel thought it was plugs being a bit old. I replaced them but will not be able to get back to them for another run.

How many miles on your plugs? Might want to perform a VANOS test as well.

[Thonas]

Why is it nosing over at 7,000rpms? Have you performed a VANOS test recently?

Kassel thought it was plugs being a bit old. I replaced them but will not be able to get back to them for another run.

[stash1]

So what should I do next for more NA HP? Is the next step cams?

Why is it nosing over at 7,000rpms? Have you performed a VANOS test recently?

[Slideways]

So what should I do next for more NA HP? Is the next step cams?

Yep. Though, I think that the current setup is solid as is. The funds might be better spent on a few DEs or track days.

[Thonas]

Full Supersprint (Stepped headers, race cats, sport Muffler)
Kassel MAP conversion, CSL Conversion
Turner CSL air box
Kassel dyno tune (mustang dyno)

So what should I do next for more NA HP? Is the next step cams?

[Mspir3d]

Nice numbers man!! What BW turbo are you running? Turbo manifold?


Sent from my iPhone using Tapatalk

Thanks! It is a maxpsi e85 kit with Spa manifold and the BW 364.5 sx-e

[SliM3]

I’ll update mine, ~770 whp and 700 ft lbs. The BW maxed at 25psi, I’m planning on ordering a xona rotor hopefully. The afr was lower by .5 or so on the wideband in the car but still looking a little lean.

Nice numbers man!! What BW turbo are you running? Turbo manifold?


Sent from my iPhone using Tapatalk

[stash1]

I’ll update mine, ~770 whp and 700 ft lbs. The BW maxed at 25psi, I’m planning on ordering a xona rotor hopefully. The afr was lower by .5 or so on the wideband in the car but still looking a little lean.

Those are some very srs numbers sir, thanx for posting!

[stash1]

Full Supersprint (Stepped headers, race cats, sport Muffler)
Kassel MAP conversion, CSL Conversion
Turner CSL air box
Kassel dyno tune (mustang dyno)

Congrats, nice gains, and thanx for posting!

[Thonas]

I’ll update mine, ~770 whp and 700 ft lbs. The BW maxed at 25psi, I’m planning on ordering a xona rotor hopefully. The afr was lower by .5 or so on the wideband in the car but still looking a little lean.

Wow, those are some big numbers!! Your car certainly goes to 11

[Mspir3d]

I’ll update mine, ~770 whp and 700 ft lbs. The BW maxed at 25psi, I’m planning on ordering a xona rotor hopefully. The afr was lower by .5 or so on the wideband in the car but still looking a little lean.

[CrisSilberGrau]

Thonas Congrats bro, really nice numbers. Excited to see your torque figures as I'll be going SS stepped and oversize dual throughout. Im at 325/250 whp/wtw on dynojet now (turner csl map, oe euro header, scza) , a little more oomph in the midrange never hurt anyone.

[Thonas]

Full Supersprint (Stepped headers, race cats, sport Muffler)
Kassel MAP conversion, CSL Conversion
Turner CSL air box
Kassel dyno tune (mustang dyno)

[stash1]

87k

Cool, thanx!

[332]

can delete, edited original post!