Where Are We Buying CSL Bumpers These Days?

[Gt4]

It isn't saying much to be fair - but I did drive this restored E36 M3 for 2 weeks planning to purchase it last Summer. The headliner started to sag, the A pillar trims unclipped and the tumbler started spinning to eternity.

Still, it's probably more reliable and doesn't fall apart as much as an E46 - and it's much cheaper to own / rebuild.

The E46's A & C pillars will sag, armrests & center consoles creak, the ashtray and covers' rubber coating scratch with any meaningful interaction and the rear view mirrors leak amongst options specific issues: like the M-Texture being a fragile, expensive fabric.

It doesn't take away from my enjoyment of my build - they're just E46 things you have to deal with to get to enjoy the S54, 420G, chassis and its much more pleasing aesthetics.

Was this the ‘’low mileage’’ E36 M3 Laval VW was selling?

You need to realize an E46 M3 is a 20years old car. Each car has it’s specific problems. My first E46 M3 was a daily driver and I drove it 2-3 winters and it wasn’t making as much plastic noise as my E90 M3 or F31 328xi does during the cold days… and no electronic damper rattling noise too…

[jet_dogg]

The E46 M3 is, from my experience, the most expensive of any M3s to dial in. Part of it is due to relatively poor build quality of the era and the impressive step up with the CSL upgrades and those coming from modern technology.

No matter the black hole it has created in my pockets, it's been a great leaning and rewarding process. I can't wait to drive it soon.

Not just e46 but bmws in general are shittily built. I have an old merc from the same era with half the problems, a fraction of the mainenance and I still call that a piece as well.

The problems with this car are comical, many, diverse in nature and frequent in terms of failures with regards to engine maintenance. I always got a chuckle when people would buy a cheap used m3 (before the rise in prices) and try to cut corners or "save up" for maintenance because they simply didn't do their homework and had no idea what they're getting themselves in to.

[Obioban]

It isn't saying much to be fair - but I did drive this restored E36 M3 for 2 weeks planning to purchase it last Summer. The headliner started to sag, the A pillar trims unclipped and the tumbler started spinning to eternity.

Still, it's probably more reliable and doesn't fall apart as much as an E46 - and it's much cheaper to own / rebuild.

The E46's A & C pillars will sag, armrests & center consoles creak, the ashtray and covers' rubber coating scratch with any meaningful interaction and the rear view mirrors leak amongst options specific issues: like the M-Texture being a fragile, expensive fabric.

It doesn't take away from my enjoyment of my build - they're just E46 things you have to deal with to get to enjoy the S54, 420G, chassis and its much more pleasing aesthetics.

Spoken like someone that’s never owned an e36 🤣

[Epoustouflant]

Was this the ‘’low mileage’’ E36 M3 Laval VW was selling?

No, the car is still here and available for sale.

You need to realize an E46 M3 is a 20years old car. Each car has it’s specific problems.

I do not, not realize that. I talk about it openly.

That's a point I often make when people ask me about the E46: it's a 2 decade old car using 3 decade old designs in some respect. The suspension and interior designs are all directly related to the E36.

The E46 is where many things ended for BMW, some for the better, a few for the worse. Nothing wrong in making that statement.

My first E46 M3 was a daily driver and I drove it 2-3 winters and it wasn’t making as much plastic noise as my E90 M3 or F31 328xi does during the cold days… and no electronic damper rattling noise too…

The E9x / E6x was a blank slate for most things. Having taken apart both interiors, the E90's build quality was ahead, by a lot. As an example, it makes use of vibration dampening clips and foams all across the interior.

The E46? Bolts and plastic baby

The only thing that will rattle in an E9x M3 are the seat belt holders in the B pillars, and the fancy / stupid belt extender. The steering wheel rubber coating's trim will eventually start to lift. There's little else that goes wrong with them.

I had 2x E90 323xi and 328xi as Winter beaters. They're solid cars. The F3x non N55 cars are super meh, and indeed sh*t boxes. The N20 engine is a disgrace.

and no electronic damper rattling noise too…

I have put my previous E92 M3 EDC, my current E92 M3 DCT and E60 M5 EDC through a total of 6 Quebec winters and 100,000km. I don't know what you mean.

Put the equivalent E46 in the Winter and your front and rear subframe carriers will be rusted, along with the rear trailing arms. The front metal fenders will eventually develop rust issues as well and the rear light's seal wears out, letting water creep into the battery tray.

To be fair, that last bit was still an issue on the E60, but what isn't an issue on the E60.

Not just e46 but bmws in general are shittily built. I have an old merc from the same era with half the problems, a fraction of the mainenance and I still call that a piece as well.

The 90s weren't the rosy era some romanticize for sure. I want to enjoy the E46 M3 for what it is - it's an unperfect analogy: for me these marked the end of our "air cooled" era.

Raw, fun, light, buzzy and beautiful to look at that.

The problems with this car are comical, many, diverse in nature and frequent in terms of failures with regards to engine maintenance. I always got a chuckle when people would buy a cheap used m3 (before the rise in prices) and try to cut corners or "save up" for maintenance because they simply didn't do their homework and had no idea what they're getting themselves in to.

I lol'ed - comical indeed. We convinced ourselves cutting into a rear axle carrier panel and welding beams was totally fine.

I had to make that point with the CSL diffuser, using my car has an example. Most brackets were broken off from an unclaimed love tap at the rear bumper.

These cars are 20 years old and were inexpensive for a while. Many haven't always been cared for as we do today.

Spoken like someone that’s never owned an e36 🤣

That 2 weeks was enough to convince me I shouldn't - lol!

How was your experience with it?

[Epoustouflant]

Spoken like someone that’s never owned an e36 🤣

That 2 weeks was enough to convince me I shouldn't - lol!

How was your experience with it?

[Chas3n]

Sent from my iPhone using Tapatalk Pro

[0-60motorsports]

Sent from my iPhone using Tapatalk Pro

Cant wait! Pricing and other info coming as soon as I receive them from Vorsteiner

[sathu]

“Some say that last week he was found in a locked room tied to a chair with German piano wire and been there since 2020. And that this week, he is making CSL parts from fancy material. All we know is he’s called the Mile End Composite guy.”

hey i was wondering if i could get some
help getting one? i have one already except i need another due getting brake checked from a drunk driver just want my alpine white restored back to its former glory.

[Projecte46m3]

Got mine from Mile End Composites. The all carbon fiber construction is beyond amazing!

[Gt4]

hey i was wondering if i could get some
help getting one? i have one already except i need another due getting brake checked from a drunk driver just want my alpine white restored back to its former glory.

I can add you to the waiting list but expect a 3 month delay cause I already have 6 members in line already

https://nam3forum.com/forums/forum/classifieds/members-parts-for-sale-wtb/e46/233256-3x-brand-new-mile-end-composite-carbon-fiber-csl-front-bumpers

[MotorSportThree]

[QUOTE=Gt4;n257314]

I can add you to the waiting list but expect a 3 month delay cause I already have 6 members in line already

Any word on availability for mile end CSL bumper?

[AbbeyRoad]

I just placed an order for the front, trunk lid and diffuser from Vorsteiner. Hopefully it looks and fits great!

[Bornacane]

Very interested in buying the gt4 bumper is there a site or email to reach out to him? I can’t direct message for some reason. Probably to few posts.

[Slideways]

Very interested in buying the gt4 bumper is there a site or email to reach out to him? I can’t direct message for some reason. Probably to few posts.

You can add the tag Gt4 and they should see the post.

[Gt4]

Very interested in buying the gt4 bumper is there a site or email to reach out to him? I can’t direct message for some reason. Probably to few posts.

I have one ready to go right now, it's for 2001-2002 aluminum rebar.