F8X M3/M4 CF Drive shaft mod

[Altaran]

Yes that's correct, no heat shield.

I am running the heat shield. I had to bend it at certain sections to prevent contact, but it's easy to do when underneath and the car is out of gear. Just turn the wheels and listen if there is a grinding noise from heat shield contact.


Btw, I tracked my car on Monday, no issues with the CF shaft.

Gesendet von meinem Pixel 7 mit Tapatalk

[fattycharged]

I think so.

Jae, know of any shops in Houston who could take on the most recently posted configuration by spool1?


Sent from my iPhone using Tapatalk

[bigjae46]

Jae, know of any shops in Houston who could take on the most recently posted configuration by spool1?


Sent from my iPhone using Tapatalk

I wouldn't trust anyone in Houston. I think Driveshaft Specialists are in San Antonio, don't see why they couldn't handle it. Not sure if they can dynamically balance the shaft which is the reason why the shop that EthanolTurbo used which is apparently a spinoff of Powertrain Industries would be the best option.

[CrisSilberGrau]

Any more updates from the ones that have installed this mod? I have my 7629 being shipped soon. Need to see what is the best way to go about installing it.

[x Spades x]

Bump!

[Altaran]

Found a guy from Ontario on IG that has a pic with this mod done from February. Profile is @velart_motorsport
I don't know him, but if anyone here is looking for a good shop in North America to get this done, he might be worth reaching out to.

Mine now has 3500km on it and is still working fine. It survived a ring trackday, so full load is not an issue 😂

Gesendet von meinem Pixel 7 mit Tapatalk

[Mike RT4]

Found a guy from Ontario on IG that has a pic with this mod done from February. Profile is @velart_motorsport
I don't know him, but if anyone here is looking for a good shop in North America to get this done, he might be worth reaching out to.

Mine now has 3500km on it and is still working fine. It survived a ring trackday, so full load is not an issue 😂

Gesendet von meinem Pixel 7 mit Tapatalk

The drive-shaft is probably wondering where all the torque went .

[0-60motorsports]

Found a guy from Ontario on IG that has a pic with this mod done from February. Profile is @velart_motorsport
I don't know him, but if anyone here is looking for a good shop in North America to get this done, he might be worth reaching out to.

Mine now has 3500km on it and is still working fine. It survived a ring trackday, so full load is not an issue 😂

Gesendet von meinem Pixel 7 mit Tapatalk

Shipping to and from Canada is ridiculously high especially to Bahrain.