Paging Nogaro Owners: Measurements Needed

[LSB4Me]

Hey Everyone:

I am looking at installing some Nogaros but will want to reupholster the center inserts to stay true to my Impuls / Anthracite cloth interior.

If you have Nogaros, could you measure the upper and lower inserts—top to bottom, left to right (for each). Trying to assess how much Impuls cloth I need and then figure out how to harvest the donors.

Thanks in advance.

[liam821]

Can't help with the measurements... but on that fabric front, I've never seen that fabric for sale. You might want to contact BMW Respored Seats (@bmwrestoredseats on Instagram) they might have a source for the fabric. They've had the fabric in stock before.

[LSB4Me]

Can't help with the measurements... but on that fabric front, I've never seen that fabric for sale. You might want to contact BMW Respored Seats (@bmwrestoredseats on Instagram) they might have a source for the fabric. They've had the fabric in stock before.

Thanks, Liam. Yes, unfortunately G8AT (Implus Cloth) hasn't been remade (yet). Here's hoping . . .

If the measurements work out, I am planning to find a donor seat of front or rear seats, then pull the skins to make the Nogaro inserts. It's a bold plan.

[Obioban]

I can do this tomorrow, if nobody else has yet.

[LSB4Me]

I can do this tomorrow, if nobody else has yet.

Could I trouble you to take these measurements when you have a second?

[Obioban]

Derp, totally forgot. Setting a reminder to do it tomorrow.

[OldRanger]

Looks the back panel surface dimensions are roughly 18” x 11”, and the dimensions on the seating surface of the lower cushions combined is 18” x 14”

[Stilt]

Thanks, Liam. Yes, unfortunately G8AT (Implus Cloth) hasn't been remade (yet). Here's hoping . . .

If the measurements work out, I am planning to find a donor seat of front or rear seats, then pull the skins to make the Nogaro inserts. It's a bold plan.

Don't say that too soon, I have some stuff in the works right now, and it won't be white-labeled Replicate...

__
I've already sourced the manufacturer of the OEM leather, sourced the plastic that shapes the seat cover and mounts it to the seat frame and also found a source for M-texture (F2AT) and a few other M fabrics. For now, I'm working on Impulse / Anthrazit (G8AT). I just haven't been able to put it all into fruition as I have been busy with school. But that will be changing shortly, and I can allocate more time to this.