Announcement

Collapse
No announcement yet.

Remote Damper Reservoir Mounting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Installed like this in one of my previous build
    GT4 Composites

    2003.5 BMW E46 M3 Laguna Seca Blue / LSB
    2006 BMW E46 M3 Individual Estoril blue / Black
    2024 Toyota Land Cruiser 1958 Black

    Comment


      #32
      Got any pics from the wheel well?

      Comment


        #33
        Originally posted by CrookedCommie View Post
        Got any pics from the wheel well?
        No, built that car in 2019-2020.

        Depending where you mount the reservoir, you can route the hoses exactly at same spot where the rigid brake lines goes through the rubber grommets.

        Or if you mount reservoirs closer to rad support, hoses can pass from wheel wells to engine bay where chassis/sheet metal ends and hose next to intake tube and windshield washer reservoir neck
        GT4 Composites

        2003.5 BMW E46 M3 Laguna Seca Blue / LSB
        2006 BMW E46 M3 Individual Estoril blue / Black
        2024 Toyota Land Cruiser 1958 Black

        Comment


          #34
          When mounting on the exhaust side may want to consider a heat shield of some sort. Whole purpose of the external reservoir is for more fluid capacity to improve the thermal capacity of fluid in the damper.

          Comment


            #35
            Originally posted by CrookedCommie View Post
            Can anyone share how they routed the front lines through the wheel wheel and fender to keep everything out of the way and secure? I'm thinking about putting the canisters on the front of the radiator support, should be able to reach with the hood open to turn the knob.
            I did the same, but it's honestly not all that convenient and somewhat difficult to reach the adjusters. Though I does look pretty slick with them peaking out


            Sent from my iPhone using Tapatalk

            Comment

            Working...
            X