Email porterfield. They are awesome and have pretty much any pad shape you might need.
-
-
OK didnt know that was the pad shape "number". Thanks.Originally posted by Slideways View Post
ST60 pad shape appears to be D1247
AP probably uses Ferodo or another brand of pad. Just have to find out which pad compound is recommended for street use. Porterfield street might be a good one from the list in the link.
ferodo 2500 are too aggressive for the street. I think i might check out these:
Comment
-
This was a long time coming. A couple of years ago they allegedly moved production to Mexico which I think was we are just selling what is left on the shelves and fleecing the company for its assets. As soon as Centric bought Stoptech maybe 10 years ago there was a very visible difference in the availability of parts, new development, and support.Originally posted by Cronenberged View Post
I really liked Stoptech - a smaller company with great support. Maybe not the best BBK but certainly a great balance between affordability and performance. But the reality is Stoptech was doomed, the original owners were smart for selling. I don't see aftermarket BBKs kits being a very good market.Comment
-
I always use Zeckhausen for part numbers and cross-referencing brake stuff.Originally posted by Slideways View Post
ST60 pad shape appears to be D1247
AP probably uses Ferodo or another brand of pad. Just have to find out which pad compound is recommended for street use. Porterfield street might be a good one from the list in the link.
I liked the Porterfield pads. A decent in between. Might be a little aggressive for some.Comment
-
Yes i have heard great things about porterfield but im going to give the above cheapo PFC pads a shotOriginally posted by bigjae46 View PostComment
-
Any recommendations for replacement brake hoses for the ST40 caliper now that the StopTech units are no longer available?Comment
-
Id like to know as well for the ST60 and ST40......Mine need replacing just as a refresh. They have been on there for 15 years...Originally posted by nyc951 View PostComment
-
Yeah, I probably need to replace mine. Should be a relatively standard hose...as long as the banjo bolt is the same size, probably can use hoses from an AP or Brembo kit. Check Zeckhausen?Originally posted by 0-60motorsports View PostComment
-
For some reason there are no hoses coming up for me on ZECKHAUSEN.Originally posted by bigjae46 View PostLast edited by 0-60motorsports; 06-02-2026, 08:09 AM.Comment
-
Worst case scenario, someone like HEL can make custom brake lines if they don't have a set already made.
Comment
-
Yes that's always an option. I'll order the above part numbers and easily compare them on the car without having to remove anything and report back. It's gonna be a few weeks before they get here though due to the situation in the region and delayed shipping times.Originally posted by elbert View PostComment
-
Spiegler will also make custom brake lines.Comment
-
I’m not sure if these work for the ST60 fronts, but the part number for the SS brake lines for ST40 fronts should be 950.34000Originally posted by 0-60motorsports View Post
The lines for rear ST40 should be 950.34506Comment
-
Im trying to find them online, Hopefully someone replies and confirms they are in stock. I have no reason to believe that the lines are different between the ST40 and ST60.Originally posted by ugaexploder View PostComment
-
I personally am a huge fan of Spiegler brakes lines and would personally go that route!
MikeHigh Temp Caliper Rebuild Kits For Brembo/Stoptech/Akebono
www.ohioperformancesolutions.com
2007 C4S F77 Aerokit / 2004 E46 M3 / 2018 M3 compComment
Comment