DMG Autosport not fulfilling order

[scotty737]

I had this same issue years ago for a standard strut tower bar after the stock one broke on me. It was months of back and forth before I got it...

[davidinnyc]

My main issue is my towers cracked along the holes and I didn't do a great job grinding the welds. I had to grind welds on the top and bottom, unfortunately I went too far in some areas.

I don't have cracks anymore but I do have reduced metal thickness in areas that are near the holes unfortunately. I really feel I need a flat footing on top and plates on the bottom at this point.


Edit: Maybe I'll order the spacers for my towers (even though they don't have the bumps) and use with the stock bar until I can maybe find a suitable alternative in down the line. More surface area on the tops of the towers.

I ordered these and they fit beautifully.

https://ebay.us/m/dRbQbe

[Cubieman]

I ordered these and they fit beautifully.

https://ebay.us/m/dRbQbe

Ordered, thank you, seems like a good setup with compromised towers and stock bar. Now my problem will be the studs on my camber plates won't be long enough, always something.

[9kracing]

So no updates?

[xansabi]

So no updates?

Absolutely none.