Announcement

Collapse
No announcement yet.

Windshield cowls back in stock

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by davidinnyc View Post
    I'll buy one and see how it fares against an OEM one I have sitting in the garage, also new. Will report findings.
    did you get yours in?

    Comment


      #17
      Originally posted by fattycharged View Post

      did you get yours in?
      Mine had a ship ready date of 1/28, which is now pushed back through the first week of February…

      Comment


        #18
        Here are a couple pics of Amazon vs original OEM on my 2002.

        The clips I ordered from the dealer based on RealOEM were wrong so I reused the original.

        Differences: the Amazon cowl has the grommets around the wiper motor post molded in (vs OEM cowl where the grommets were a separate piece). The Amazon cowl is missing a seal on the underside. Other than that it seems very similar.

        Click image for larger version  Name:	IMG_8649.jpg Views:	0 Size:	108.9 KB ID:	341056

        Click image for larger version  Name:	IMG_8651.jpg Views:	0 Size:	64.3 KB ID:	341057
        Clip on right is original, left is that I ordered:
        Click image for larger version  Name:	IMG_8644.jpg Views:	0 Size:	133.7 KB ID:	341058

        Click image for larger version  Name:	IMG_8646.jpg Views:	0 Size:	118.8 KB ID:	341059

        Click image for larger version  Name:	IMG_8645.jpg Views:	0 Size:	101.0 KB ID:	341060
        Last edited by YYZ-M3; 01-24-2026, 08:25 AM.

        Comment


          #19
          Hardest part of the job was getting the aluminum tapered shim out from the wiper arm :/

          Comment


            #20
            Originally posted by YYZ-M3 View Post
            Here are a couple pics of Amazon vs original OEM on my 2002.

            The clips I ordered from the dealer based on RealOEM were wrong so I reused the original.

            Differences: the Amazon cowl has the grommets around the wiper motor post molded in (vs OEM cowl where the grommets were a separate piece). The Amazon cowl is missing a seal on the underside. Other than that it seems very similar.

            Click image for larger version Name:	IMG_8649.jpg Views:	0 Size:	108.9 KB ID:	341056

            Click image for larger version Name:	IMG_8651.jpg Views:	0 Size:	64.3 KB ID:	341057
            Clip on right is original, left is that I ordered:
            Click image for larger version Name:	IMG_8644.jpg Views:	0 Size:	133.7 KB ID:	341058

            Click image for larger version Name:	IMG_8646.jpg Views:	0 Size:	118.8 KB ID:	341059

            Click image for larger version Name:	IMG_8645.jpg Views:	0 Size:	101.0 KB ID:	341060
            The seal is what seals the water from running down into the engine bay. Likely no a big deal, but definitely not ok. The clips which you ordered are correct - they are the inner part only.
            BMW / E46M Interior & Trim Restoration.
            https://nam3forum.com/forums/forum/c...ch-restoration

            Comment


              #21
              I think the real market for these will be collision and windshield replacement shops. The one time I had water incursion was on my Allroad 4.2 right after I had a windshield replaced. It was from an improperly installed seal — the smell of the water tipped me off before any computers could get wet under the passenger wheel well.

              For this car, I’ve replaced this part with OEM back in the day but I’m sure I’ll need to do it again. Nothing about it said “once in your ownership fix.” So my view is if they fit, assume they’ll be like brake pads and move on with life, have a good day.

              maw

              Comment


                #22
                Originally posted by YYZ-M3 View Post
                Hardest part of the job was getting the aluminum tapered shim out from the wiper arm :/
                Best way to do that is the push the wiper FLAT to the windshield... then rock left/right (west/east). They come out in like 15 seconds. The key is to PUSH THE WIPERS FLAT. This takes the tension off of the nut.

                Comment


                  #23
                  That worked for the drivers side. Pass side was a bear.

                  Comment


                    #24
                    Originally posted by x Spades x View Post

                    Best way to do that is the push the wiper FLAT to the windshield... then rock left/right (west/east). They come out in like 15 seconds. The key is to PUSH THE WIPERS FLAT. This takes the tension off of the nut.
                    Don't push to hard or you can break the windshield
                    '09 HP2S, '12 R12GSA, '00 Black 323iT, '02 Alpine 325iT (Track Wagon), '02 Alpine 330iT
                    Instagram @HillPerformanceBimmers
                    Email to [email protected]

                    Comment


                      #25
                      Originally posted by YYZ-M3 View Post
                      That worked for the drivers side. Pass side was a bear.
                      BMW / E46M Interior & Trim Restoration.
                      https://nam3forum.com/forums/forum/c...ch-restoration

                      Comment


                        #26
                        Has anybody received their ECS/Turner one yet? Mine still hasn't shipped out. Wonder if it differs from the Amazon ones at all.

                        Comment


                          #27
                          Mines been here a week or so, I just havent taken it out of the box yet.
                          '09 HP2S, '12 R12GSA, '00 Black 323iT, '02 Alpine 325iT (Track Wagon), '02 Alpine 330iT
                          Instagram @HillPerformanceBimmers
                          Email to [email protected]

                          Comment


                            #28
                            I got my Bremmen out of the box today and it looks pretty good. It didn't come with the clips like a BMW or the foam seal on the back side but otherwise like's quite decent. Certainly not as good as a BMW part but will likely be just fine for 99% of the population.


                            ***Edit, I wouldn't be against buying another when the time comes. Next up will be seeing how the sedan version compares.
                            '09 HP2S, '12 R12GSA, '00 Black 323iT, '02 Alpine 325iT (Track Wagon), '02 Alpine 330iT
                            Instagram @HillPerformanceBimmers
                            Email to [email protected]

                            Comment


                              #29
                              Originally posted by George Hill View Post
                              I got my Bremmen out of the box today and it looks pretty good. It didn't come with the clips like a BMW or the foam seal on the back side but otherwise like's quite decent. Certainly not as good as a BMW part but will likely be just fine for 99% of the population.


                              ***Edit, I wouldn't be against buying another when the time comes. Next up will be seeing how the sedan version compares.
                              Curious to know how this compares to the Amazon one since people are saying they could likely be from the same factory/manufacturer

                              Comment


                                #30
                                simon_c maybe, probably? I don’t have an Amazon acct and am happy with the service from ECS, so I likely won’t ever have an Amazon to compare.
                                '09 HP2S, '12 R12GSA, '00 Black 323iT, '02 Alpine 325iT (Track Wagon), '02 Alpine 330iT
                                Instagram @HillPerformanceBimmers
                                Email to [email protected]

                                Comment

                                Working...
                                X