M10/E12 conrod bolt troubles

[Cubieman]

I may just pick up that linked tool (thanks) to use with a breaker bar when I do my own car, I worked at shop for a while and used a new 1/2" techangle when I did work on customer cars.

I currently own the 3/8" which I won't use for this job, too much force at an akward angle for me.

[1000hp]

How many people are actually verifying their digital torque wrench is accurate (I bought a used SnapOn TechAngle for this exact reason) and it is off as much as 11* vs my analog....

Definitely worth getting it calibrated if you're investing in the tool.

Was yours reading high or low?