Supersprint (sport) muffler adjustment

[Maxima SE]

I had some issues similar to OP and I ordered the Rogue Engineering exhaust mount for the passenger side. Body shop said they would put it on for me…will report back soon to see if it fixed the issue.

did the RE mounts fix the issue?

I put on a SS sport and my passenger tips sit more inside as well. Runnig new OE hangers and I even flipped the passenger hanger to face "incorrectly" and the tips still not as flush as driver side. I am running new section 2 to 3 gaskets and I thighten those bolts before I tightened the bolts that mount the muffler to the hanger.

I wonder if its a design flaw with SS?

[ugaexploder]

did the RE mounts fix the issue?

I put on a SS sport and my passenger tips sit more inside as well. Runnig new OE hangers and I even flipped the passenger hanger to face "incorrectly" and the tips still not as flush as driver side. I am running new section 2 to 3 gaskets and I thighten those bolts before I tightened the bolts that mount the muffler to the hanger.

I wonder if its a design flaw with SS?

I think it's a design flaw as I've tried several things to try and manipulate the OE hangers. I will find out this week hopefully as I'm finally scheduled to pick up the car.

[Derek //M]

Would the Rogue item help? It looks like it can be adjusted fore and aft

https://www.rogueengineering.com/Rogue-Engineering-E36E46E92-Rear-Muffler-Hanger-v2-sold-each_p_302.html

[Maxima SE]

Would the Rogue item help? It looks like it can be adjusted fore and aft
https://www.rogueengineering.com/Rog...ach_p_302.html

ohhh thats exactly what would help. This is awesome and better than the powerflex ones. The larger bolt holes allow you to fine tune the muffler position for sure. I was going to cut the mounting bracket on the muffler and reweld it but this item is a much better idea. I am kind of hestitant to go with it though because it basically eliminates any muffler back/forth motion and i am afraid it would rip the mounting bolts off the bottom of the spare tire area. The OEM hangers are designed to allow for back/forth movement during acceleration and braking.