Eventuri intake owners

[WOLFN8TR]

I must have a sensitive butt dyno LoL. When I installed the Eventuri I noticed a difference, not huge but it was noticeable. I upgraded the to the Bespoke filter and believe it not it did make a slight improvement. The sound and engine bling were added bonuses. I do believe the car adapts to the added air volume/flow over time so the benefits you first feel are not as noticeable down the road.

http://www.eventuri.net/filters/

Bespoke Filter $80:

https://www.evasivemotorsports.com/store/product/eventuri-filter-replacement-bmw-m6-f1x/?msclkid=b7f16f1fa220124e3a2a3085aa541572&utm_source=bing&utm_medium=cpc&utm_campaign=**LP%20-%20Shop%20-%201%20-%20No%20Product%20Types%2FGoogle%20Categories&utm_term=4586475317340991&utm_content=EVE-ND661-FTR-12%20%7C%20Eventuri%20Filter%20Replacement%20-%20BMW%20M6%20(F1X)%20%7C%20%2480

[DropTopKingM3]

I must have a sensitive butt dyno LoL. When I installed the Eventuri I noticed a difference, not huge but it was noticeable. I upgraded the to the Bespoke filter and believe it not it did make a slight improvement. The sound and engine bling were added bonuses. I do believe the car adapts to the added air volume/flow over time so the benefits you first feel are not as noticeable down the road.

http://www.eventuri.net/filters/

Bespoke Filter $80:
https://www.evasivemotorsports.com/s...%20%7C%20%2480

Very useful information, thank you for that. The link you posted is for an M6 upgraded filter. Will that still work on an e46 M3 eventuri application?


i just opened up the box. It was very well packaged and the eventuri tape was a nice touch. It looks as if I have the updated filter already. If I’m wrong please correct me.

[old///MFanatic]

I finally pulled the trigger on an Evolve Eventuri intake for my car. Has anyone with this intake changed the stock elbow?
Thanks in advance.

I have a genuine GruppeM intake which is somewhat the same as the Eventuri design but with a much better intake outside air scoop. I added the Bimmerworld elbow. It actually doesn't allow for any variation in the angle of part it's fitted to, unlike the ribbed factory. So it kind of pulled whole unit up at an angle(not wanted). It certainly looks like it has better air flow. But surprisingly being the material used it made the car intake/engine resonance softer. Like it absorbed some of it. So stock was somewhat louder than the aftermarket elbow. At least that was my impression. Wasn't expecting that, but makes sense when you think about it.

[Silbergrau metallic]

When I bought my car it had an AFE intake on it, had it for a couple years and then purchased an Eventuri Intake and installed it. What I noticed was a more refined and sharper Intake noise compared to the AFE Intake. One day I was bored and decided to put the AFE back on and disliked the muffled sound it made so much I immediately put the Eventuri back on and my car seems to make more power with Eventuri. I had a large Air Filter for my AFE and I thought I would get more flow with that compared to the Eventuri, which is smaller, but whatever they did designing that Eventuri, IT WORKS! and I prefer it much more, PLUS! it's a bit of Eye Candy to boot. I do have the AFE Silicone Elbow and that coupled with the Eventuri is a perfect compliment to my Supersprint full race exhaust system. There are so many combinations of exhaust and intake sounds available for E46 M3's, but I'm very happy with my combination.

[WOLFN8TR]

Very useful information, thank you for that. The link you posted is for an M6 upgraded filter. Will that still work on an e46 M3 eventuri application?

I just opened up the box. It was very well packaged and the eventuri tape was a nice touch. It looks as if I have the updated filter already. If I’m wrong please correct me.

Ya that looks like the newer version. I posted the link of the Bespoke filter without noticing it wasn’t for the E46 M3 sorry.

New vs Old Filter

[C///M]

The old filter design was discontinued in 2018. All current kits ship with the new filter design.

Sent from my Pixel 2 XL using Tapatalk

[DropTopKingM3]

Guys if you want a great deal go to autocouturemotoring.com . $803.89 SHIPPED !!

Dont forget to add coupon code BFCMACM

[Thonas]

If anyone is looking to purchase a like new Eventuri intake, I am selling mine. https://nam3forum.com/forums/forum/c...n-fiber-intake

[Rickyrosh]

Just installed mine. The sound is awesome and addictive! Power seems to have increased per the butt dyno, feels more responsive to throttle over 2k.

[sdmcoupe]

I just installed mine as well and my experience so far mimics RickyRosh's and wpfn8tr's. There's a definite increase in power and the car sounds SO much better. Money well spent.

[DropTopKingM3]

Hey guys. Just a heads up, Autocouture is having a sale on eventuri intakes. Use code NEWSACM5 at checkout.

[RazorM]

Just to add to original thread topic. I am in phase of ordering parts advised for remap with Hassan, and I contacted eventuri and evolve directly with this question about elbow/boot improvement.

Both eventuri and evolve confirmed that they tested intake with and without original elbow with no difference.

[Cmamainer]

Pretty sure there were dyne tests showing a 10hp increase.

[RazorM]

Pretty sure there were dyne tests showing a 10hp increase.

I was under same suspicion. But with eventuri it did not, according to producer. Maybe with stock intake it’s different

[TeddybearCup]

FWIW, the oem maf inner diameter matches the ID of the ribbed sections at 3.5". As in, the ribs aren't a smaller cross section, though obviously, less smooth than a silicone wall. Would need some flow testing to actually show the OEM boot is majorly impacting flow when paired here though maybe more turbulence.