Need help doing vanos test with INPA

[JP1580]

Update (with status)
- VANOS test (using toolset32) -> FAIL (times out)
- VANOS pressure test -> FAIL

- Timing -> PASS
- VANOS Oil Flow Regulating Valve - 11367830341 -> replaced. Found what appears to be a clog.
- VANOS piston seals -> no nicks. Cleaned and reinstalled
- VANOS high pressure pump -> cleaned and reinstalled
- valve adjustment -> PASS
- VANOS high pressure valve -> disassembled, cleaned and rebuilt. Seems to be functional.

Planned:
- Valve cover gasket
- VANOS high pressure line
- VANOS Accumulator

If there are additional checks before I close the put the cover back on, let me know please.

[ac427]

Update (with status)
- VANOS test (using toolset32) -> FAIL (times out)
- VANOS pressure test -> FAIL

- Timing -> PASS
- VANOS Oil Flow Regulating Valve - 11367830341 -> replaced. Found what appears to be a clog.
- VANOS piston seals -> no nicks. Cleaned and reinstalled
- VANOS high pressure pump -> cleaned and reinstalled
- valve adjustment -> PASS
- VANOS high pressure valve -> disassembled, cleaned and rebuilt. Seems to be functional.

Planned:
- Valve cover gasket
- VANOS high pressure line
- VANOS Accumulator

If there are additional checks before I close the put the cover back on, let me know please.

Where did the stuff in the palm of your hand come from?

[JP1580]

It was shoved in the inlet portion on the oil flow regulating valve.

[ac427]

It was shoved in the inlet portion on the oil flow regulating valve.

Was made of metal?

Was it the regulator that supplies the vanos assembly or the regulator in the vanos valve block?

[JP1580]

Was made of metal? Yes. Think of the stainless steel scrubbers for pots and pans. It was shoved in the inlet hole (small OD)

Was it the regulator that supplies the vanos assembly or the regulator in the vanos valve block?

Yes

[ac427]

Yes

Yes, which?