No oil pressure after rod bearings

[jet_dogg]

Good to hear man, appreciate you bringing closure to this thread for anyone else who may run into this issue in the future.

[tlow98]

Glad you caught that. Not a small mishap!

[scotty737]

Here is the comparison of the correct oring and the one I was sent originally for reference. Both came in the same bag with the same part #.

[cobra]

Here is the comparison of the correct oring and the one I was sent originally for reference. Both came in the same bag with the same part #.

Wow definitely too much stretch on that one.

[Icecream]

Here is the comparison of the correct oring and the one I was sent originally for reference. Both came in the same bag with the same part #.

Wow, really happy you got it sorted without damage.

[Boost]

Always better safe than sorry. Glad you got it solved. #PatienceIsAVirtue

[WOLFN8TR]

So I just received the box from FCP. They 100% sent me the wrong oring last time. What a waste of my time and potential damage.

I had the same issue while doing my cooling system refresh. ECS sent two different size Orings for the hard pipes on the water pump, a 16 and 18mm. They are both suppose to be 18’s. 🙄
Good to hear all is good now.