Engine replacement... failing SMG test

[eacmen]

Just a suggestion. What gave me fits was the little tube from the SMG reservoir was not connected tightly to the pump. Air got in, and it would not prime. Once that was fixed, it passed the SMG adaptation first time.

Also this! That tube needs to be pushed into the connector on the pump harder than you might think.


Sent from my iPhone using Tapatalk

[x Spades x]

Just a suggestion. What gave me fits was the little tube from the SMG reservoir was not connected tightly to the pump. Air got in, and it would not prime. Once that was fixed, it passed the SMG adaptation first time.

Thanks, ill double check that too.

[x Spades x]

Hey Fellas,

Regarding the continued bleedung... do i keep bleeding the Actuator repeatedly (Test 1 thats passing) or do i bleed test 2 repeatedly (the Clutch Slave) thats failing?

[eacmen]

Hey Fellas,

Regarding the continued bleedung... do i keep bleeding the Actuator repeatedly (Test 1 thats passing) or do i bleed test 2 repeatedly (the Clutch Slave) thats failing?

Just test 2


Sent from my iPhone using Tapatalk

[x Spades x]

Just wanted to check in... how mant tines did you gues try bleeding the slave/clutch (test 2), before it finally passed?

Just trying to gauge the number of attempts.

[eacmen]

Just wanted to check in... how mant tines did you gues try bleeding the slave/clutch (test 2), before it finally passed?

Just trying to gauge the number of attempts.

i've never had your issue before but i've seen people needing to do it 20 times.


Sent from my iPhone using Tapatalk

[x Spades x]

Another update... I'm officially on SMG bleed 56 and still failing the slave cyl clutch/hard line bleed (test 2).

Again, new ckutch, spring, slave cyl. Any other suggestions?

[eacmen]

Another update... I'm officially on SMG bleed 56 and still failing the slave cyl clutch/hard line bleed (test 2).

Again, new ckutch, spring, slave cyl. Any other suggestions?

Id start looking at the solenoids and such on the smg pump.

Youre sure the clutch slave is installed correctly with the plunger in the fork?


Sent from my iPhone using Tapatalk

[x Spades x]

Id start looking at the solenoids and such on the smg pump.

Youre sure the clutch slave is installed correctly with the plunger in the fork?


Sent from my iPhone using Tapatalk

yeah, slave is installed correctly. I can manually shift from R-2 and shift through all gears using INPA

[eacmen]

yeah, slave is installed correctly. I can manually shift from R-2 and shift through all gears using INPA

Just because you can shift gears doesnt mean the clutch and clutch slave is installed correctly.


Sent from my iPhone using Tapatalk

[x Spades x]

Just because you can shift gears doesnt mean the clutch and clutch slave is installed correctly.


Sent from my iPhone using Tapatalk

well how would i know, any way to tell?

[eacmen]

well how would i know, any way to tell?

Not sure.

When I try to do the clutch adaptation I can hear the fork moving the pressure plate.

But doing the clutch bleed you just hear the hydraulic cylinder pumping. Its basically the same as someone continuously pumping the clutch pedal on a manual. Do you hear anything when trying you do the clutch bleed?


Sent from my iPhone using Tapatalk

[x Spades x]

Not sure.

When I try to do the clutch adaptation I can hear the fork moving the pressure plate.

But doing the clutch bleed you just hear the hydraulic cylinder pumping. Its basically the same as someone continuously pumping the clutch pedal on a manual. Do you hear anything when trying you do the clutch bleed?


Sent from my iPhone using Tapatalk

Yeah, i heard everything moving around... sound normal (as in likeit usually sounds over the years). When i shift manually, everything sounds quite. Hmm... the actuator passes every time.

[eacmen]

Yeah, i heard everything moving around... sound normal (as in likeit usually sounds over the years). When i shift manually, everything sounds quite. Hmm... the actuator passes every time.

Are you using INPA or a different tool to do the SMG adaptations?


Sent from my iPhone using Tapatalk

[x Spades x]

Are you using INPA or a different tool to do the SMG adaptations?


Sent from my iPhone using Tapatalk

INPA