Announcement

Collapse
No announcement yet.

Windshield washer reservoir mounting

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Windshield washer reservoir mounting

    Real OEM refers to this part here to screw the windshield washer bolts into. But I can’t see how this would clip onto the crash bar. Is real OEM wrong?


    Tags: None
    #2
    It should be part 07129901748 and plug in to those rectangular cutouts.

    Gesendet von meinem Pixel 7 mit Tapatalk

    2002 E46 M3 TiAg Coupé >> full tracktool conversion @m346gt
    2000 986 Boxster S >> ice cream getter
    Past: E46 330Ci, 944S2, 996 C4S
    • Likes 2

    Comment

      #3
      Originally posted by Altaran View Post
      It should be part 07129901748 and plug in to those rectangular cutouts.

      Gesendet von meinem Pixel 7 mit Tapatalk
      Seems to be discontinued…

      Comment

        #4
        Junkyard time. They're on basically all BMWs.
        2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - SSV1 - HJS - Mullet Tune - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

        2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

        Comment

          #5
          Originally posted by heinzboehmer View Post
          Junkyard time. They're on basically all BMWs.
          Any spots come to mind? Pretty sure regular e46 reservoir doesn't mount there. Doubt regular e46 kevlar has them.

          All my local facebook guys parting out m3 have these missing for some reason.

          Comment

            #6
            I think the balls for the "suction cups" on the front bumper use these, but not 100% sure they're the same part.

            This might also help: https://www.realoem.com/bmw/enUS/partxref?q=07129901748
            2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - SSV1 - HJS - Mullet Tune - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

            2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

            Comment

              #7
              Originally posted by heinzboehmer View Post
              I think the balls for the "suction cups" on the front bumper use these, but not 100% sure they're the same part.

              This might also help: https://www.realoem.com/bmw/enUS/partxref?q=07129901748
              I just looked up the purchase record when I ordered all the parts for converting mine from metal carrier to Kevlar. I got 8 of these and 4 of the suction cup screws. And I did not get any other type of cage.
              So these should also be used on the driver side for the horns and for the washer tank on the passenger side.

              Gesendet von meinem Pixel 7 mit Tapatalk

              2002 E46 M3 TiAg Coupé >> full tracktool conversion @m346gt
              2000 986 Boxster S >> ice cream getter
              Past: E46 330Ci, 944S2, 996 C4S
              • Likes 1

              Comment

                #8
                Following. My tank is currently MIA.

                Comment

                  #9
                  Originally posted by Altaran View Post
                  I just looked up the purchase record when I ordered all the parts for converting mine from metal carrier to Kevlar. I got 8 of these and 4 of the suction cup screws. And I did not get any other type of cage.
                  So these should also be used on the driver side for the horns and for the washer tank on the passenger side.

                  Gesendet von meinem Pixel 7 mit Tapatalk
                  They are NLA anywhere. Need to find an e46

                  Comment

                  Previous template Next
                  Working...
                  X