e46 M3 Touring Conversion - To Europe and Back

[puma1824]

Yeah, that’s probably because the sensors are hitting the ground. Jack the rear up and see if it goes away. If so, you can either find a way to angle them up or … get a new bumper

eek get a new bumper would be costly lol....may if it works I just disable PDC or disconnect the two lowered centered sensors?

[Bry5on]

eek get a new bumper would be costly lol....may if it works I just disable PDC or disconnect the two lowered centered sensors?

PDC won’t work if you disconnect any sensors. Disabling is easy enough, just pull the fuse. If yours was a retrofit, I’m not positive on which fuse would have been used but the factory one is fuse 24

I’d be looking into angled sensor inserts to point the middle two upwards if I were in your shoes. Good luck.

You should also let M3Projekts know that this is an issue after you verify so he can move them into the factory location (higher, bumper beam height) on other future conversions.