Announcement

Collapse
No announcement yet.

MSS5x Binary Modification Tool Update

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MSS5x Binary Modification Tool Update

    It’s been a while since we updated the MSS5x Binary Modification Tool for the E46 M3 & E39 M5 so we thought it was time to add some of the top requested features.

    New features include:
    • Kess V2 reads are now support.
    • Burble & Pop added for the E39 M5.
    • AlphaN added for the E39 M5.
    • Idle Speed adjustment for the E46 M3 & E39 M5.
    • Cat Protection threshold adjustment for the E39 M5.
    • EGT Monitoring disablement for the E39 M5.
    • GPS/Clutch Switch reconfiguration for after SMG to Manual swaps.
    • GPS disablement for SMG to Manual swaps.
    • Z4M Electric Fan settings for the E46 M3 Aux Fan.
    Click image for larger version

Name:	tool_update2.JPG
Views:	4185
Size:	89.8 KB
ID:	8702

    As always updates for existing users are free of charge and the latest version of the tool can be found on the downloads page here.

    Feel free to post feature requests etc below.

    Cheers,

    Martyn

    #2
    Awesome mate, just grabbed it!
    DD: /// 2011.5 Jerez/bamboo E90 M3 · DCT · Slicktop · Instagram
    /// 2004 Silvergrey M3 · Coupe · 6spd · Slicktop · zero options
    More info: https://nam3forum.com/forums/forum/m...os-supersprint

    Comment


      #3
      Nice!!
      TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
      Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
      Evolve Eventuri
      - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

      Comment


        #4
        🤘👍
        Youtube DIYs and more

        All jobs done as diy - clutch, rod bearings, rear subframe rebush, vanos, headers, cooling, suspension, etc.

        PM for help in NorCal. Have a lot of specialty tools - vanos, pilot bearing puller, bushing press kit, valve adjustment, fcab, wheel bearing, engine support bar, etc.

        Comment


          #5
          Appreciate the service. I definitely need the idle increase because I just put in a new lightweight flywheel. Perfect timing.
          This is my Unbuild Journal and why we need an oil thread
          https://nam3forum.com/forums/forum/m...nbuild-journal

          "Do it right once or do it twice"

          Comment


            #6
            Thanks Martyn, love this!
            '00 R11S, '09 HP2S, '12 R12GSA, '00 Gray 332iT (SOLD), '00 Black 323iT, '02 Alpine 325iT (Track Wagon), '02 Japan Rot 325iT
            Instagram @HillPerformanceBimmers
            Email to George@HillPerformance.com

            Comment


              #7
              This is great to see as I have been wanting to up my idle speed just a tad bit since my exhaust heat shield rattles at idle.

              Comment


                #8
                Is MSSflash a valid option to make sure I don't end up with a brick due to reaching flash limit? I just got ECUworx BinMod registered and am very new to this kind of stuff.
                2004 Silbergrau Metallic 6MT
                Karbonius/OEM Snorkel/Flap/HTE Tuned
                Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA

                OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
                RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

                2006 M6 Black Saphire SMG
                Instagram

                Comment


                  #9
                  Originally posted by Cubieman View Post
                  Is MSSflash a valid option to make sure I don't end up with a brick due to reaching flash limit? I just got ECUworx BinMod registered and am very new to this kind of stuff.
                  Yeah you can reset the flash counter with the paid version of MSSFlasher.
                  2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

                  2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

                  Comment


                    #10
                    Just did a flash today with a binary modified with this tool. Worked perfectly, great program.

                    No clue why the SMG didn't come from the factory like this.
                    '03.5 M3 SMG Coupe - Jet Black / Black

                    Comment


                      #11
                      Originally posted by r4dr View Post
                      Just did a flash today with a binary modified with this tool. Worked perfectly, great program.

                      No clue why the SMG didn't come from the factory like this.
                      You think it's good now, you need to load the "255" CSL firmware on your SMG DME. That's what they all should have come with.

                      Comment


                        #12
                        UPDATING THE SMG ECU TO RUN CSL ‘255’ SOFTWARE
                        For a definitive guide on how to update your SMG DME / ECU to run CSL ‘255’ software for improved shifting click here!
                        TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                        Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                        Evolve Eventuri
                        - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                        Comment


                          #13
                          Originally posted by C///M View Post
                          You think it's good now, you need to load the "255" CSL firmware on your SMG DME. That's what they all should have come with.
                          Sorry, I should have specified. I did both parts — flashing through 255 software onto my SMG DME as well as the parameters via the binary modification tool.
                          '03.5 M3 SMG Coupe - Jet Black / Black

                          Comment


                            #14
                            Originally posted by Martyn View Post
                            New features include:
                            • Burble & Pop added for the E39 M5.
                            I don't see the burble pop option enabled for my e39 m5 file.

                            Click image for larger version

Name:	image_4139.jpg
Views:	3281
Size:	138.4 KB
ID:	10940

                            Comment


                              #15
                              Originally posted by tdott View Post

                              I don't see the burble pop option enabled for my e39 m5 file.

                              Click image for larger version

Name:	image_4139.jpg
Views:	3281
Size:	138.4 KB
ID:	10940
                              I'm looking in to this, it looks like some US files have different minimum ignition tables to the euro ones.

                              Comment

                              Working...
                              X