Announcement
Collapse
No announcement yet.
Search Result
Collapse
117 results in 0.0874 seconds.
Keywords
Members
Tags
-
BMW doesn't sell them but you can definitely source them. https://mlreng.com/products/copy-of-...39326587486295...
-
When i replaced the actuator, i had the tranny sitting on a transmission jack, there is tenssion on the rod and pin, i had to use a hammer and a small...
Leave a comment:
-
Looking at those photos, did you reuse the clutch fork? It looks like it has definitely has seen better days.. - If you reused it, it is possible its...
Leave a comment:
-
Might be easier to just turn on your AC and watch the water drip from the bottom of the car as condensation builds up...
- Likes 1
Leave a comment:
-
I have used something similar in the past, you need to access it from the blower motor from the engine side, you remove the cover behind the cabin filter...Last edited by Irhase46m3; 04-30-2024, 09:33 AM.
Leave a comment:
-
It shouldnt be sporadically. Try this: on cold start, just push the brake pedal once to start the car and let the it idle in neutral on its own for 15min,...
Leave a comment:
-
Interesting about the air... I had a similar scenario when i had too much air in the system, what i realized was the the pump didnt have enough oil within...
- Likes 1
Leave a comment:
-
Its a red plastic lock ring, try to push the plastic tube all the way into the reservoir, that should lift the ring up a bit, then compress it by pushing...
- Likes 1
Leave a comment:
-
I think it does a pretty good job in terms of longevity of the ACC, it is a serviceable item. I think what contributes to the leaks is the breakdown of...
- Likes 1
Leave a comment:
-
-
Hi There - Quick question, any chance we can get ibusapp to integrated with bluebus? I love the concept of bluebus and think its awesome as ive been following...
Leave a comment:
-
The actuator is what mimics the shifter in a manual transmission, it does the rotation and forward and backward movement of the shift selector rod of...
- Likes 1
Leave a comment:
-
I dont think this is related to the pump... Typically if the pump is priming and holding pressure and you replaced your slave with a new one, you should...
- Likes 1
Leave a comment:
-
First Drive today with the rebuilt diff, it feels incredibly tight. The shop confirmed it was a V1 diff. Fixed a vibration i was having and also the diff...
- Likes 5
Leave a comment:
Leave a comment: