Announcement
Collapse
No announcement yet.
Search Result
Collapse
15 results in 0.0058 seconds.
Keywords
Members
Tags
-
The jerky mentioned in the original post was resolved by adjusting the KF_TI_N_RF_VL (WOT injection) table. Edited the original post....
- Likes 3
-
Thank you very much. Are you the one who created this XDF?
With this, I was able to stand at the starting line of the setting....
- Likes 1
Leave a comment:
-
Thank you for sharing the information. Looking at the XDF that Bry5on forked to GitHub, the alpha-N main Map address is 0xD356....
Leave a comment:
-
Thank you for contacting us during your vacation.
I would like you to tell me the name of the map when you have time.
According to public...
- Likes 1
Leave a comment:
-
Thank you for such information. It was a necessary information for a beginner like me.
How do you integrate engine speed and air-fuel ratio?...
- Likes 1
Leave a comment:
-
Thanks for your comment.
The VANOS table was already in CSL calibration. Did you find any concerns in my VANOS test results?...
Leave a comment:
-
Thanks for the advice. I made some adjustments based on your advice and made a big improvement.
1.Does open flap table mean KF_DKBA_RF_N_HERD/SOFT?...Last edited by mushitaro; 07-04-2023, 06:48 PM.
- Likes 1
Leave a comment:
-
This is the result of the VANOS test. I think it's within acceptable limits.
Test file : C:\EDIABAS\ECU\MSS54_VANOS_TESTS.TST
Start...Last edited by mushitaro; 07-02-2023, 07:11 AM.
Leave a comment:
-
[Resolved]What Causes CSL Conversion tune to Jerky?
Thanks to everyone who contributed information to this community.
After running Terra's CSL Tune on my car it jerks below 3500 rpm when running...Last edited by mushitaro; 08-22-2023, 08:34 PM.
- Likes 1
-
The problem was resolved and MssMapper was able to work in my vehicle.
The fundamental problem was that I ended up using the full binary...Last edited by mushitaro; 06-29-2022, 10:41 PM.
- Likes 1
Leave a comment:
-
It's a late post, but I'll leave it as a note to help future people.
I had the same problem, but I was able to recover.
First,...Last edited by mushitaro; 06-27-2022, 05:47 PM.
- Likes 1
Leave a comment:
-
It's a late post, but I'll leave it as a note to help future people.
I had the same problem, but I was able to solve it....
Leave a comment:
-
I am also confused by the operating procedure.
I flashed the Fullbinary created by MSS Mapper with MSS Flasher.
Engine does not start....Last edited by mushitaro; 06-28-2022, 06:24 AM.
Leave a comment:
-
Would you please share the XDFs file you are using?
I'm trying to adjust my own rev match parameters.
In Japan, Lightweight flywheel...
Leave a comment:
-
M-track mode coding by Bimmer Geeks standard tools
I have summarized the coding procedure in NCS Expart included in Bimmer Geeks standard tools on my blog.
This is the coding procedure in "Factory...
Leave a comment: