Mine just arrived today, it looks great. I'm looking around for the latest firmware, or does this batch already have it installed?
Announcement
Collapse
No announcement yet.
BlueBus: A fully integrated A2DP Bluetooth solution
Collapse
X
-
I think Ted mentioned earlier that the latest firmware was installed during the recall. V14 is the latest, so if you’re showing that, you should be good to go.Originally posted by r4dr View PostMine just arrived today, it looks great. I'm looking around for the latest firmware, or does this batch already have it installed?
Comment
-
Replied to your emailOriginally posted by GyroF-16 View PostHi Ted-
got my BlueBus back last week, and just reinstalled it today. Music plays fine, but no audio on phone calls. The person on the other end can hear me, but I can’t hear anything. Playing back voicemails is silent as well. It all worked fine (except for a little echoing) before sending it in for recall. I sent you an email with a little more info.
Anyone else seeing this after recall?
. The recall doesn't mess with anything that would impact call audio, though. At least not in "Bluetooth" mode 
I've got a couple leads on electronics shops in Australia that are willing to do the work. Only 13 units in AUS / NZ, thankfully!Originally posted by calmelb View PostHi Ted,
I was just wondering how the recall will work for those of us outside NA/Europe?
Also a feature request, when the BB wakes up with the car (such as unlocking it) can it estabilish a bluetooth connection then, so that by the time you start the car your phone & the BB have done the bluetooth handoff and the music is able to play immediately? I can't imagine it would be a huge drain on the battery because its only whilst the BB is awake
I've thought about that, but it would be a bit annoying to be on a call, then unlock your car only to have the call routed to a car that is not in a state where it can handle said call. Same for music playback.
This is correct. All new units are going out with the latest firmware.Originally posted by GyroF-16 View Post
I think Ted mentioned earlier that the latest firmware was installed during the recall. V14 is the latest, so if you’re showing that, you should be good to go.
Thanks!
-Ted
Comment
-
i will have to agree with this. i currently have a grom unit and the way it is instructed to be wired, if i'm on the phone and walking up to the car to unlock it, the grom unit turns on and the call/music immediately transfers. the car is off, so i can't hear anything and i have to disable bluetooth to get the call back. same goes for me working on my car. if i open the door, or the trunk, or do something that "wakes it up", the grom grabs the BT signal. it's very very frustrating. i much prefer the unit only take control of phone/audio when the car is turned on and ready to receive it.Originally posted by t3ddftw View Post
I've thought about that, but it would be a bit annoying to be on a call, then unlock your car only to have the call routed to a car that is not in a state where it can handle said call. Same for music playback.
just my 2 cents.Last edited by MarcoPolo; 07-28-2020, 05:17 PM.'06 Carbon Black
Sabelt, Brey Krause, MCS 2-way, SuperSprint, Karbonius, Epic, Volk
Comment
-
Ah didn't realise they were so rare down under! If you want me to help out by being a local contact I'm happy to help where I can!Originally posted by t3ddftw View PostI've got a couple leads on electronics shops in Australia that are willing to do the work. Only 13 units in AUS / NZ, thankfully!
That's very fair. I only noticed it in our other car (an E90) where the aftermarket bluetooth is only doing music not phone (Stock TCU for phone) so hadn't thought of that issue!Originally posted by MarcoPolo View Post
i will have to agree with this. i currently have a grom unit and the way it is instructed to be wired, if i'm on the phone and walking up to the car to unlock it, the grom unit turns on and the car immediately transfers. the car is off, so i can't hear anything and i have to disable bluetooth to get the call back. same goes for me working on my car. if i open the door, or the trunk, or do something that "wakes it up", the grom grabs the BT signal. it's very very frustrating. i much prefer the unit only take control of phone/audio when the car is turned on and ready to receive it.
just my 2 cents.
Comment
-
Sent u a PM, checking if any updates for me, thanksLast edited by TropicalM3; 07-30-2020, 07:40 AM.
Comment
-
Awesome! I have the IHKA on my bench, but it's not yet wired in as I have been busy shipping units like a madman.Originally posted by BubbaTree View PostJust received the newly tuned up BlueBus, and it appears to be working like a champ! Local weather will be about 115 degrees today, so, we'll check out that a/c feature!
Remarkable customer service and turnaround time, Ted.
Thanks!
Steve
Great to hear!Originally posted by Feakara View PostHave had my unit back for three days now been working great.
Thanks!
-Ted
Comment
-
hello ted, my bluebus has come back from Michael Boahen. Say thank you for that ...Originally posted by t3ddftw View Post
I'll shoot you an email with an experimental firmware. It'll probably be Monday as I am working hard on fulfilling orders this weekend.
Thanks!
-Ted
If your time allows, could we now try the firmware?
greetings
Comment
-
Give me until early next week on this, please.Originally posted by Andy2424 View Post
hello ted, my bluebus has come back from Michael Boahen. Say thank you for that ...
If your time allows, could we now try the firmware?
greetings
Howdy! Can you PM me the order number for the TCU adapter? I have very few "adapter only" orders.Originally posted by Zekarus View Postany shipping update for the tcu adapters?
Thanks!
-Ted
Comment

Comment