SMG to 6MT Conversion

[Shonky]

can anyone tell me the torque specs for the bellhousing and the trany?

Edit: Updated to latest version:
Edit 2: Link to direct post doesn't work. Post #17 in this thread
https://nam3forum.com/forums/forum/main-forum/e46-2001-2006/414-e46-m3-torque-spec-thread-every-bolt-on-the-car-on-diagrams?p=5291#post5291
which links to:

https://drive.google.com/file/d/1elAiZFD7rKL4bsivtVGPtylbmWtRxIYW/view?usp=sharing

Page 73/75

[pawelgawel]

ECS has the clutch switch 700 listed on sale, but I just chatted with someone and its not Brown, its Black.

https://www.ecstuning.com/BMW-E46-M3-S54_3.2L/Checkout/

[pawelgawel]

question regarding PIN 2 on the clutch switch, I have installed the ID sensor, do I have to splice this into something or just straight into pin 20 in DME?
this DME part has me a little confused... I take out the SMG modual all together and salomon relay.. do I need to move over a wire from there over to the main DME?

[pawelgawel]

Well she's done ✔

Last thing is programing... but everything went well.. had to order a pilot bearing from BMW (koyo) as all aftermarket bearings were not the actual proper size. I decided to go with the UPDATED LuK TOB, and im ok with that, there is a memo out in 2015 the front plate shifts for better surface contact on the plate..
overall, I feel confident and I'd do it again since im familiar now with all that needs to be done.

[S54B32]

ECS has the clutch switch 700 listed on sale, but I just chatted with someone and its not Brown, its Black.
https://www.ecstuning.com/BMW-E46-M3-S54_3.2L/Checkout/

Here in germany I have no problem to order m3 clutch switches directly from bmw dealer. One is brown and one is green (700 and 701)

[S3diment]

Here in germany I have no problem to order m3 clutch switches directly from bmw dealer. One is brown and one is green (700 and 701)

Would you proxy a 61319122700 switch to the US?

[pawelgawel]

Here in germany I have no problem to order m3 clutch switches directly from bmw dealer. One is brown and one is green (700 and 701)

yeah lol please help us out ... need one. I see one on ebay in Lithuania but itll take about 2 months to get that from them. I know Air Canada flyes to Frankfurt everyday so airmail is possible. PM me if you can do that plsI need the 700 one

[Andy2424]

The number has changed, you can order it here.

https://www.schmiedmann.de/de/produkt/1993778-neu?produkt=35-42-6-876-898

[pawelgawel]

The number has changed, you can order it here.


https://www.schmiedmann.de/de/produk...5-42-6-876-898

seems you don't read up.. superseded # does not mean the #700 that M3 needs in NA. 898 will not work

[Andy2424]

Apparently you have no idea what you are writing

[pawelgawel]

Apparently you have no idea what you are writing

just read this entire thread please. North American ECUs require 700 series chip "which is Brown", to have full cc functionality without any other additional programing. the regular black 898 will not work without more coding.

[Martyn]

It's not just North American cars, euro cars will only allow cruise to operate with the brown '700' switch too. No amount of coding will make it work without a '700' switch.

[Andy2424]

does not matter. Then just buy this one.


https://www.hubauer-shop.de/de/advan...0&inc_subcat=1

if you want, I'll buy it for you and send it to America

Didn't read it all the way sorry

[S54B32]

just read this entire thread please. North American ECUs require 700 series chip "which is Brown", to have full cc functionality without any other additional programing. the regular black 898 will not work without more coding.

To clarify things, as explained earlier in this thread...You can use 700 or 701 switch. ONLY these 2 switches work with MSS54(Hp) because ECU need to read signal HIGH (+12v) instead of LOW (GND). I tested this on bench and also have both switches here and can confirm this.
With 701 switch on US and Japan cars you need to code out Clutch interlock in ews Modul or bridge clutch signal on EWS plug. This switch in green.

With 700 switch you will have start/clutch interlock in EWS working. Working also in every other M3( also in M3’s without clutch start interlock). This switch is brown.

pawelgawel : if you really find absolute no other way to get the switch, I can send you a switch if you pay the switch and shipping...

[SandeepM3]

You guys should be able to order a 701 here. I did that from the dealer. 700 auto supersedes in the system but doesnt do it for 701.