Exhaust question (Supersprint)

[AWE46M3]

No extra section 2 bracing. It’ll have less of an effect for sure, but my setup is using a non-M muffler so it shouldn’t really translate to the majority of folks with M3 shaped mufflers and section 2s. Also, the H-pipe and resonator themselves are super effective bracing, so there’s not much extra to be had if you ask me.

edit: think of wiggling a piece of dry spaghetti. Wiggling it from the end produces a whip effect at the other end. Supporting it in the middle and wiggling both will substantially reduce the whipping. The further toward the end you support it, the incrementally smaller the gains will be. You basically want to keep it tight near the headers and support it as far back to the gearbox as possible. Everything after the gearbox moves independently so you have less of a chance to make a big impact.

Love the metaphor. Thanks for your input 🤝

[Bry5on]

Updated DXF files attached, will provide a new link to purchase a set of corrected brackets that *should* fit without modification. Note that I haven't actually made one with these dimensions yet, so I'd appreciate a beta test run from someone here!

[Bry5on]

Link to checkout with version 2 here: https://cart.sendcutsend.com/yj4priombmvf

I’ve edited the original link with a description that it needs modification. I’ll update the link in that post to this one as soon as we have a confirmed fitment. Thanks for the patience guys.

[AWE46M3]

Peoples champ Bry5on

[0-60motorsports]

Uh oh. I designed two versions of this bracket, the first one didn’t fit perfectly. I may have inadvertently linked everyone to the first design. Yes, you’ll need to make the slot deeper to fit. Damn, I’m sorry everyone.

No worries brother. i'll order the updated version. Which part is is the updated one? SSv1_Gearbox_Mount___Exh_Bracket.dxf or the SSv1_Gearbox_Mount___Trans_Bracket___v2.dxf

Thanks

[x Spades x]

I'll buy the updated version too, as I just don't have the capability to modify.

as soon as there is a link, ill purchase ill also buy an extra clamp bracket. Thank you again!

Has anyone purchased v2 to confirm fitment?
I'm doing a road trip from CT to FL, so if I get in made, I can have it sent there, install, then post

[AWE46M3]

I'll buy the updated version too, as I just don't have the capability to modify.

as soon as there is a link, ill purchase ill also buy an extra clamp bracket. Thank you again!

Has anyone purchased v2 to confirm fitment?
I'm doing a road trip from CT to FL, so if I get in made, I can have it sent there, install, then post

Bryson dropped the new link a few days ago and also updated the previous thread that had the V1 link. Here you go:

Link to checkout with version 2 here: https://cart.sendcutsend.com/yj4priombmvf

[x Spades x]

Bryson dropped the new link a few days ago and also updated the previous thread that had the V1 link. Here you go:

Aaaah I missed that. Much appreciated 👏