Originally posted by R1pilot
View Post
Announcement
Collapse
No announcement yet.
Review: Cobra Nogaro seats (uniquely street friendly fixed back bucket seat)
Collapse
X
-
Originally posted by elbert View Post
Which Pole Positions do you have? I will be listing for sale driver side BK mounts that will work for the regular width PP, but not the PP ABE (I found this out the hard way).
Comment
-
Originally posted by R1pilot View Post
Do you have the B-K part number for the brackets?
I have some Pole Position and a set of manual sliders that I want to put together. Right now I am using fixed Recaro brackets.
Thanks!
The Recaro Pole Position ABEs require the R-9222 (Driver side) and R9223 (Passenger side) mounts.
Comment
-
Originally posted by R1pilot View Post
I honestly had no idea there are different models of PP. Here are a couple of pictures of my seats:
Comment
-
Originally posted by DoubleSidedTape View PostFound a set of sedan manual sliders at the junkyard today, some motivation to actually do this project (getting Imola Nogaros made by Cobra) over the winter.2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal
2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal
Comment
-
Originally posted by SQ13 View Post
Take a close up photo of the lap belt hole. The tag may also contain the information you need.
What exactly changes on the ABE ones that will not allow the bracket to be interchangeable with the regular PP? I checked online and the bracket hole location seem to be the same between them.
I have these:
Comment
-
Originally posted by zivagolee View Post
I noticed when trying out the R9222 (365mm-429mm) with the PP ABE seats, the mounts would bulge out a bit so I am using the R9220 (430mm-460mm) and it seems to fit much better with some spacers.
Originally posted by R1pilot View PostWhat exactly changes on the ABE ones that will not allow the bracket to be interchangeable with the regular PP? I checked online and the bracket hole location seem to be the same between them.Last edited by elbert; 10-05-2022, 08:42 AM.
- Likes 1
Comment
-
Having a difficult time installing the front bolt on the mounts. I can install only one of them as the stock mounting stud interferes with the bolt and will not let it pass through.
I see on the original post that Obioban has the bolts going from the top down, but the instructions says otherwise. Maybe they were updated at some point.
Did you guys press that stud out or how was that dealt with.
Just in case it matters I am using manual X3 rails.
Comment
-
Thanks guys. I hate forcing things, but I was so frustrated that I ended up following Thoglan’s advise. It was still a pita but it worked.
If you do this, I would suggest you start forcing the bolt and stop when you have enough to engage the threads with the mount on. Otherwise the bolt will stick out and the mount cant pivot onto it, hopefully that is clear.
I am starting to doubt my purchase and maybe I should have stuck with my Recaro mounts …
Comment
Comment