If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Two out of the big three completed. Euro headers, euro sec 1, eventuri intake, complete cooling system, and HTE Tune all installed. Build thread coming soon.
woke up early this morning in hopes of cooler temps to do a cold start for my Secondary Air Injection monitor to be ready. it was 80 degrees...so it didn't happen lol
"your BMW has how many miles!?"
2003 M3 coupe - Imolarot/Black 6 M/T - JRZ - Ground Control - Volk Racing - Karbonius - SuperSprint - Recaro - Schroth
2007 GX470
woke up early this morning in hopes of cooler temps to do a cold start for my Secondary Air Injection monitor to be ready. it was 80 degrees...so it didn't happen lol
Installed an "Innovate LC2" wideband O2 sensor, used switched/fused 12v power and ground from pins 6 & 7 found under the center console from the telephone connector. This was handy as all that need to be removed was the cupholder/coin holder.
Tried my best to make it as clean as possible, the module is located in my glove box which is nice as there is a status light you can check easily.
I just bought a serial to USB adapter and can now read real-time AFR in Testo now I just need to find out how to record or log the AFR alongside other information.
So far I can view/log AFR on its own or view/log other "main" info (from OBD) on it's own but cannot combine or sync AFR with "main" info into one cohesive log file.
Comment