Okay, now we're talking. This should work with milled down e39 bushings inserted into the knuckles. The nice thing about that approach is that I don't need to cut or ream a taper myself, just turn or mill the factory e39 bushings.
What remains to be seen is whether the rubber boot can compress an extra millimeter more than stock and, if there is enough thread engagement, if I can increase the depth of the press-in bushing to drop the load on the bottom edge of the knuckle a little bit. As you can see, I've got a safety factor of 2 everywhere, but would really like something around 3 everywhere
What remains to be seen is whether the rubber boot can compress an extra millimeter more than stock and, if there is enough thread engagement, if I can increase the depth of the press-in bushing to drop the load on the bottom edge of the knuckle a little bit. As you can see, I've got a safety factor of 2 everywhere, but would really like something around 3 everywhere
Comment