Announcement
Collapse
No announcement yet.
Search Result
Collapse
56 results in 0.0081 seconds.
Keywords
Members
Tags
-
^ I would not count on any programming/OS changes, outside of flashing a modified bootsector/OS to run CSL tunes on a non CSL HP DME which is already...
-
Shortest differential gearing may only be 4.25 due to BYTE limitation in ECU IE FF=255. DME Calc is X/60. 255/60=4.25
I figured out Grenze/Gange...
Leave a comment:
-
^You are correct. I also uploaded XDFs to help you with at least one method.....
https://github.com/saildot4k/MSS54-XDFs/tree/master/Eng...
Leave a comment:
-
-
-
-
^Just flag the post, no need to quote it and make more work for the mods.
- Likes 1
Leave a comment:
-
This is something I wrote up for E30 S54 swaps, the only difference for you may be how you pull +12v fuse switched:
https://github.com/s...
Leave a comment:
-
Just to correct your nomenclature: that would be a MacBook Pro Retina 13".......
Mac Pro's are desktops.
For me, I picked...Last edited by R3Z3N; 09-21-2021, 03:40 PM.
Leave a comment:
-
Depends on the radiator. Mine needed a bung, and I had it welded as close to the coolant hose flange as possible....
Leave a comment:
-
I posted here which sensor/connector and pins are needed to replace the stock sensor with the same scaling, synopsis 3rd page orange cells:
Just...
Leave a comment:
-
Correct it does not "equal" a CSL DME. Here is more info
I think one can simply bring an MSS54HP CSL bootloader patched DME back...Last edited by R3Z3N; 08-27-2021, 02:07 PM.
Leave a comment:
-
If you want to run the CSL software on a non-CSL MSS54HP, then you need to use (click here)
The bootloader is part of the "OS" in the...
Leave a comment:
-
https://github.com/saildot4k/MSS54-X...-&-Speed-Limit
K_N_TBEGR: Value once exceeded will be recorded to deny warranty claims...Last edited by R3Z3N; 08-24-2021, 02:15 PM.
Leave a comment:
-
You have confused MSS54 (or HP) software version on the ECU with WHICH software was used to pull/push the data to/from the ECU. The ECU has software on...Last edited by R3Z3N; 08-15-2021, 10:54 AM.
Leave a comment:
Leave a comment: