If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
*** The datacenter where this server is so graciously hosted is going to be doing power maintenance. During this maintenance, I will be shutting down this server and nam3forum will be completely offline.
Start: 6/1/2024 12:00pm PST (Saturday around noon)
End: 6/2/2024 12:00pm PST (Sunday around noon)
Announcement
Collapse
No announcement yet.
BlueBus: A fully integrated A2DP Bluetooth solution
I usually keep my phone volume around 75% and dont turn up the radio too loud, but its super noticeable. Weird. I know its not due to the bluebus, just crazy how noisy the system is
Are you on 1.1.16? There's a small fix I added to prevent this from being such a problem a while ago.
You can find the firmware version under Settings > About.
Caller ID support for the CD53, yes!!! Not sure why I'm so excited about this feature given how few calls I get while I'm driving, but still, cool!
I know I still owe you a log for the traffic programme issue. The weather in northern Germany has not been very cooperative lately and my car battery is showing signs of fatigue so it's not the best time for me to stand outside with my laptop hooked up to the Bluebus while the radio is on and key is in pos. 2. I'll get round to it eventually though, I promise!
Hi Ted,
the Firmware-Upgrade-Tool works great with Windows 10 32-bit. I installed the newest firmware 1.1.17 with this tool. But when i try to start the cVc-Tool, I get an error message. Is there any chance to get a version for Win10 32-bit? Or is the only way to activate cVc with PuTTY combined with win10 32-bit?
Caller ID support for the CD53, yes!!! Not sure why I'm so excited about this feature given how few calls I get while I'm driving, but still, cool!
I know I still owe you a log for the traffic programme issue. The weather in northern Germany has not been very cooperative lately and my car battery is showing signs of fatigue so it's not the best time for me to stand outside with my laptop hooked up to the Bluebus while the radio is on and key is in pos. 2. I'll get round to it eventually though, I promise!
Hi Ted,
the Firmware-Upgrade-Tool works great with Windows 10 32-bit. I installed the newest firmware 1.1.17 with this tool. But when i try to start the cVc-Tool, I get an error message. Is there any chance to get a version for Win10 32-bit? Or is the only way to activate cVc with PuTTY combined with win10 32-bit?
Any plans to support bluetooth connectivity when the CD53 unit is powered on and key has not been inserted into the ignition? Or is this a limitation of the ibus?
Any plans to support bluetooth connectivity when the CD53 unit is powered on and key has not been inserted into the ignition? Or is this a limitation of the ibus?
I would just rather not support this as it can potentially lead to draining a battery. I _could_ do it though.
I would just rather not support this as it can potentially lead to draining a battery. I _could_ do it though.
-Ted
Would be the same if you left the head unit on though lol. If you can make it power on with the headunit regardless of key position that would be epic. Maybe configure it as an optional setting? I would be sold on that and could finally ditch my aux setup.
Comment