Announcement

Collapse
No announcement yet.

Bimmerworld Engine Mounts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by RockyMtnM3 View Post

    Same combination and same experience, enough vibrations at initial start-up to let you know they aren't OE. When driving I don't notice it at all, occasional slight vibration at lights.

    definitely wouldn't describe it as, "a shiatsu massaging chair" lol
    Same here as well with combo and experience. Over time the vibration has decreased considerably, post the initial install it had me thinking I was going to swap the engine mounts out as it was considerably worse.

    Comment


      #17
      Originally posted by 1000hp View Post

      I put stock mounts back on that car, and it was like the angels sang the first time I started the car and it didn't vibrate my eyeballs out of my head.

      The poly mounts are all different durometers. Have you compared the durometers of the BW mounts and the Revshift stuff?
      Struggling find anything online regarding durometers with BW mounts to compare to Revshift

      Comment


        #18
        Originally posted by elbert View Post
        In my car (Bimmerworld Grp N mounts with RE transmission mounts), I found increasing revs to 1000 or 1100 rpm while idling helped with vibration.

        I’ve noticed if I hold the revs at 1k rpm, whole car feels like stock. No NVH problems while cruising or giving the car some beans

        Comment


          #19
          Originally posted by Consum3r View Post

          Same here as well with combo and experience. Over time the vibration has decreased considerably, post the initial install it had me thinking I was going to swap the engine mounts out as it was considerably worse.
          How many miles of driving it take to decrease? Compared to post initial install and now, what would you say on a scale of 1 to 10, the NVH is like?

          Comment


            #20
            Originally posted by Larky7 View Post

            Struggling find anything online regarding durometers with BW mounts to compare to Revshift
            Call Bimmerworld. They'll definitely have info on their own mounts. Might know the Revshift values, too.

            Comment


              #21
              Originally posted by Larky7 View Post

              I’ve noticed if I hold the revs at 1k rpm, whole car feels like stock.
              Yep, so now go change your idle speed settings
              Curious if someone could walk me through how to change the code/tune on my MSS54HP DME to increase the idle speed? I’d like to try setting the idle to 1,000rpm on my rally car… If it’s easy enough to do it with my laptop and cable then I’m all for it otherwise I’ll see what Hassan will charge me to do it. Thanks!

              Comment


                #22
                Originally posted by Larky7 View Post

                How many miles of driving it take to decrease? Compared to post initial install and now, what would you say on a scale of 1 to 10, the NVH is like?
                Your tolerance to NVH will certainly increase over those miles


                Sent from my iPhone using Tapatalk

                Comment

                Working...
                X