Black & Tan 332iT

[Bry5on]

Thanks guys!

Worth noting that carbon inherently has much better ability to damp noise than steel, so even the doors and hatch should improve sound deadening, roof too of course. We’ll also be lining them with some fancy lightweight acoustic absorption material (this stuff) and I’ll do some melamine foam in the front doors.

Here’s the weight distribution all said and done, almost perfect 50/50 (I’d prefer 48/52):


And one more thing while we’re in there: M3 mirrors will be going in using Attila’s latest sedan/touring bases with e90 auto-dimming glass and new wiring to replace the sunroof wiring. I’ll be removing that harness - most of it at least.

[karter16]

Do I read anything into this line? 😉

[Bry5on]

Do I read anything into this line? 😉

Ha, how about the line above it?!

Mostly several of those items are an exercise to see what is possible in what I’d consider a no-compromise (except $) M3 touring. Fully populating that list but keeping the stock M3 muffler, keeping the hitch, full interior, etc gets you to ~3150lb and 49/51 weight distribution. A couple gallons of water heavier but better weight distribution than the CSL. All with a functional/comfortable back seat and trunk.

At some point, someone needs to loan me some CSL seats so they can be recreated. Or at least in a non-folding version. Maybe then I’ll do it in due time.

[karter16]

Ha, how about the line above it?!

Ah haha - I completely missed that 😂

[discoelk]

Bodywork stuff should be crazy. The NVH change is the most interesting and unexplored thing about it. Almost anyone else doing those mods would be for a track only car.