Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.1498 seconds.
Keywords
Members
Tags
-
Doesn't resetting all engine adaptations on INPA include the VANOS?
-
Clear the codes to see which ones come back and go from there. The no crank thing sounds like an EWS sync issue.
Leave a comment:
-
I am also assuming "S" is for sport, but could be stability, slip or some German word that starts with "S". BMW advertised M-track...
Leave a comment:
-
-
There was an old thread on M3F where a few people posted if they had the LED in the cluster for the M-track mode. For the most part, the clusters with...
Leave a comment:
-
This setup requires camber arms as the rear is not low enough....
- Likes 1
Leave a comment:
-
Unless you are planning on putting thousands of miles on it a year, just use it as-is if it is currently working. Change the SMG fluid, flush the clutch...
Leave a comment:
-
Awesome set of wheels and proper fitment. It looks like they didn't need spacers to clear the front brakes.
Leave a comment:
-
A good pair of needle nose pliers with the jaws that have those small teeth works and it's a tool that most people have in their tool box. The actual...
- Likes 1
Leave a comment:
-
That is done by removing the intake manifold which is fairly easy....
- Likes 1
Leave a comment:
-
Even the factory pump will develop a small amount of play after a few miles. As long as it is not excessive play, rattling or leaking, the pump should...
Leave a comment:
-
That has been their policy for a while now and many companies prefer you use the chat feature, which is why the phone number is not listed all over their...
- Likes 1
Leave a comment:
-
The drain is a plastic pan under the heater core.
Before pulling out the heater core, one could pour some water directly behind the heater...
Leave a comment:
-
Typical amount of wear at 125k, so those are most likely the original bearings for an 05.
Leave a comment:
Leave a comment: