What did you do for your M3 today?

[bagger]

Paint correction and ceramic coating. Shiny.

[6speedS54]

Removed water pump yesterday to prep for install today, was waiting for o-rings and new bolts to show up. When I removed the water pump, a rusty discovery inside the heater core coolant pipe and water pump mating surface showed up, plus some stripped threads on the left most bolt (one holding the hard line in place). I didn't realize morons still add regular water into the cooling system, plus don't flush coolant regularly. I ended up scraping the rust inside the pipe with a tooth brush, then flushed it out with a vacuum, and removed rusty coating with some Bon Ami paste on my finger plus a green scouring pad.

I plan on running Thermocure thru the system later on to flush any remaining rust flakes out. For the stripped threads, I got a longer bolt, there is enough room in there for it. This deferred maintenance is almost over.

[Fitzy]

Changed the diff fluid, found a little bit of metal on the magnetic drain plug. We will see, but most likely looking at differential rebuild