What did you do for your M3 today?

[0-60motorsports]

0-60motorsports jono where are the sweet pics?

Once the car is ready i'll post some pics. I have not been posting pictures as I am waiting for my build thread to be recovered from the old forums. Im not going to make another one as that one was really big and detailed.

[adr_M3]

Picked up my car from the body shop after getting the side mirrors, rear spoiler as well as upper and lower trims redone



Thank you to [mention]LSB4Me [/mention]for recommending ABS Auto Body in El Monte, they did a first rate job with everything


Sent from my iPhone using Tapatalk

[siamkazi]

https://www.instagram.com/reel/DW93pspEqzy/?igsh=MzRlODBiNWFlZA==

Cruising

[6speedS54]

Changed fan clutch, at this point the cooling system is completely refreshed, if temp gauge continues climbing with AC on at high temps I will be at a loss for words

[maupineda]

Did a bunch of updates this past week.

aftermarket clutch pedal
Pagid Steet + Pads front and rear
New set of PS4s



love the meaty Look of the Pilots





kind of an odd choice

[0-60motorsports]

Did a bunch of updates this past week.

aftermarket clutch pedal
Pagid Steet + Pads front and rear
New set of PS4s



love the meaty Look of the Pilots





kind of an odd choice

Love the Pedals and Wheels

[RockyMtnM3]

Did the Bimma360 OEM exhaust restoration, going back to stock!

[Bimma360]

Did the Bimma360 OEM exhaust restoration, going back to stock!

Dude, awesome! Looks amazing. Did you use Ospho and Dr Beasley’s?

[RockyMtnM3]

Dude, awesome! Looks amazing. Did you use Ospho and Dr Beasley’s?

Thanks! I am super stoked with how it came out. I only did the Dawn, Ospho, and steel wool, Dr Beasley is enroute!

[Bimma360]

Thanks! I am super stoked with how it came out. I only did the Dawn, Ospho, and steel wool, Dr Beasley is enroute!

Crazy stuff right?! How much elbow grease did the center sections take? I may do that eventually. BTW, all those products I heard about from Obsessed Garage... gotta give credit where credit is due.

[RockyMtnM3]

Crazy stuff right?! How much elbow grease did the center sections take? I may do that eventually. BTW, all those products I heard about from Obsessed Garage... gotta give credit where credit is due.

Yes, the Ospho is awesome and the process works incredibly well. I have the exhaust hardware soaking in it now! The center section took about an hour of good work but worth it; I used section 1 as my test mule and after I did the muffler I basically haaad to do section 2 haha. For your build, I don't think you have a choice, it must be done!

That is funny, karma for sure. I will have to pop back into the OG thread and charge myself $5, after reading your post and others I had to really think about why I had developed an aversion to his content.

[Bimma360]

Yes, the Ospho is awesome and the process works incredibly well. I have the exhaust hardware soaking in it now! The center section took about an hour of good work but worth it; I used section 1 as my test mule and after I did the muffler I basically haaad to do section 2 haha. For your build, I don't think you have a choice, it must be done!

That is funny, karma for sure. I will have to pop back into the OG thread and charge myself $5, after reading your post and others I had to really think about why I had developed an aversion to his content.

Glad to hear it. Yeah I'll probably have to do it hahah. Also I can totally get why his content isn't for everyone. Nothing wrong with that. But he does find or curate great detailing stuff, and at this point in my life the last thing I need to do is research detailing stuff. I just buy the stuff he says is good, haha, and from his website at that. Anyway, glad all this stuff is working out great for you!

[karter16]

*Almost* finished my Gauge.S install in custom ash-tray enclosure. Combined with my beta version of Community Patch for 0401 CSL software I can log any of the ~3000 variables in the DME that I like at 100Hz 😎

[ucrhamann330ci]

Rouge clutch pedal. Pretty easy to install and made a difference in driving experience .

[Bimma360]

*Almost* finished my Gauge.S install in custom ash-tray enclosure. Combined with my beta version of Community Patch for 0401 CSL software I can log any of the ~3000 variables in the DME that I like at 100Hz 😎

You’re going to make more of these and sell them right? Hahah