Originally posted by bigjae46
View Post
Check your toe
I see road force balancing (RFB) more as a diagnostic tool than something I would routinely do. I used RFB to determine how out of round a wheel was - can't always see it on a dynamic balancer or if the tire was bad (it happens). I never saw a situation where a RFB fixed a vibration issue where a dynamic balance couldn't. In some cases, a RFB made noise and vibration worse. Whoever is mounting a new tire needs to understanding the markings on the side of the tire to orient the high point of the tire with the valve stem which typically optimizes the balance.
IMO, RFB as a routine is the nitrogen of tire balancing - mostly useless, makes the shop more money, and is often "flat rated" by techs. Meaning they say they did it...but didn't do it.
Due for an alignment soon, we'll see what the front is at. I always go with 0 toe up front, so not the best for tire wear.
Comment