e46 M3 Community-designed CAD files Master List

[Obioban]

This is amazing, great idea - I looked at the date of this original post and realized history is being made here. We'll be looking back on this for the rest of time as more and more of these parts become harder and harder to find

Yep-- this is almost certainly ending up as a sticky.

[Stilt]

I made this last month; I didn't want to buy one, so I made it in Fusion360 and was planning to cut it out with a laser. I can share it if there is interest. It was made to work with a Spal 2049.

I'm also working on another one that won't require drilling into the radiator.

[karter16]

I made this last month; I didn't want to buy one, so I made it in Fusion360 and was planning to cut it out with a laser. I can share it if there is interest. It was made to work with a Spal 2049.

I'm also working on another one that won't require drilling into the radiator.

Absolutely - it would be great to add to the list!


Sent from my iPhone using Tapatalk

[jayjaya29]

No affiliation but this place has a ton of E46 replacement parts:

https://octoclassic.com/product-category/bmw/e46

[karter16]

No affiliation but this place has a ton of E46 replacement parts:

https://octoclassic.com/product-category/bmw/e46

That is great to know about thank you - as more OE parts become NLA it's great to be aware of any and all alternatives to sourcing parts!

[Stilt]

Spal 2049 Efan Bracket V1



Source: https://www.thingiverse.com/thing:6701109

[heinzboehmer]

Here's V2 of the CSL airbox bushing. Basically the same as before, just added a base to keep the engine vibrations from making it ride up the peg.

[karter16]

Here's V2 of the CSL airbox bushing. Basically the same as before, just added a base to keep the engine vibrations from making it ride up the peg.

thanks - updated!

[Stilt]

Will see if I can get around to uploading this today.

[Stilt]

Front Knuckle / Kingpin

https://www.thingiverse.com/thing:6713722

Brass Clutch Pivot Pin

https://www.thingiverse.com/thing:6713726

[heinzboehmer]

Wrong kind of engineer for this, so don't laugh at my CAD skills, but phone mount available here in case anyone wants to print it out for themselves: https://cad.onshape.com/documents/aa...abcccfec208abd

More details here: https://nam3forum.com/forums/forum/m...560#post274560

[Obioban]

Stickied this thread.

... now nobody will ever look at it.