Black & Tan 332iT

[heinzboehmer]

3) I opened up the strut clamp bore on the new part and probably shouldn't have. The holes came in a little ovaled, and now I think I'll need to find an actual solution to this problem to make them round. Aluminum tape will do for shimming the oversized hole, but I'll need a way to fixture it straight which could be challenging.

Print a fixture! Then a boring bar on the lathe/mill and good to go.

[Bry5on]

Print a fixture! Then a boring bar on the lathe/mill and good to go.

Always coming at me with the logic. Of course!