Black & Tan 332iT

[karter16]

Ha, it sure was! And if you'd believe it - the plan was to finish the hatch, doors and trunk floor too! There was just too much finish work on the carbon parts to be able to pull it off with the available time. And we also threw in all four window regulators and vapor barriers for fun, plus a few other smaller things.

Oh man!! yeah good call to take the time and do it right and good as well that you've proven out the approach. Amazing work as always.

[heinzboehmer]

Good stuff! Amusing seeing "Heinz" sprinkled in the notes

[0-60motorsports]

Looks awesome. Are you still running only the outer RTAB limiters on the RTABs? Any issues there? Im guessing not.

[bigjae46]

I knew your car was coming to George's shop at some point, didn't realize you were also coming with it. If I had known sooner I would have gladly come out and helped.

I have some details to finish up on the floor pan and should be ready to ship by this weekend.

[Bry5on]

Looks awesome. Are you still running only the outer RTAB limiters on the RTABs? Any issues there? Im guessing not.

Still running them and it’s still my favorite setup!

I knew your car was coming to George's shop at some point, didn't realize you were also coming with it. If I had known sooner I would have gladly come out and helped.

I have some details to finish up on the floor pan and should be ready to ship by this weekend.

It all came together pretty fast once I found a shipping truck and coordinated coverage back home. Wish I’d had more time to pick a date way up front and then we could have done this all a little more coordinated. I’m in Austin at least a few times a year for work so there will be other chances for sure!

[Sharocks]

I commend you for keeping it non M3 on the outside.

I bet it's fun as hell with slightly narrower tires!