Maybe this has been asked already, but I don't frequent the forum enough to know. What's the orange status bar under member avatars for? It appears to represent reputation? Are there varying thresholds?
Announcement
Collapse
No announcement yet.
Dumb Question Thread - No Flaming Allowed
Collapse
This is a sticky topic.
X
X
-
Originally posted by bimmerfan08 View PostMaybe this has been asked already, but I don't frequent the forum enough to know. What's the orange status bar under member avatars for? It appears to represent reputation? Are there varying thresholds?3.91 | CMP Subframe & RTAB Bushings | SMG (Relocated & Rebuilt) | ESS Gen 3 Supercharger | Redish | Beisan | GC Coilovers & ARCAs | Imola Interior | RE Rasp | RE Diablo | Storm Motorwerks Paddles | Will ZCPM3 Shift Knob | Apex ARC-8 19x9, 19x9.5 | Sony XAV-AX5000 | BAVSOUND | CSL & 255 SMG Upgrades | Tiag | Vert w/Hardtop
Comment
-
Does anyone happen to have a list of what parts/brands to use when doing a stock clutch and/or flywheel replacement?
Thanks.2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
Comment
-
Originally posted by Cubieman View PostDoes anyone happen to have a list of what parts/brands to use when doing a stock clutch and/or flywheel replacement?
Thanks.
OE BMW pilot bearing
OE Bolts
Pivot pin, either stock or E34 steel one
and I'm fairly certain Luk makes the OE flywheel, but not 100% sure. If the surface is still in good condition, the stock one can be used with a new clutch disc as stated in the maintenance thread. If the rear main seal is not leaking, a shop I asked said it is best to leave the original one.
- Likes 1
Comment
-
Originally posted by Ubaderb View PostHow do you remove the badge on the fender grille? FCP has the emblem for $64 or I can buy the one with the supporting plate for $52. Does that mean I can pop out the emblem without removing the entire grille? I can not figure out why the one with less parts is more expensive.
Comment
-
Can anyone confirm that the rear upper and lower control arm ball joints are the same? PN shows up as 33306852895 for both, but they visually look different in the diagram.
Comment
-
I installed the Eventuri intake. Car runs great. I took a look at my long term fuel trims and they are sitting at around +12%
Before the intake, they were close to 0%
Should I be concerned? I tried unplugging the battery for a bit, no change. Should I try resetting adaptations via INPA or just leave it?
Comment
-
Originally posted by Amos View PostI installed the Eventuri intake. Car runs great. I took a look at my long term fuel trims and they are sitting at around +12%
Before the intake, they were close to 0%
Should I be concerned? I tried unplugging the battery for a bit, no change. Should I try resetting adaptations via INPA or just leave it?DD: /// 2011.5 Jerez/bamboo E90 M3 · DCT · Slicktop · Instagram
/// 2004 Silvergrey M3 · Coupe · 6spd · Slicktop · zero options
More info: https://nam3forum.com/forums/forum/m...os-supersprint
Comment
-
Originally posted by Nate047 View PostIf I remove the stock HK amp, rear speakers, and sub, will the radio still play through the front? Knowing yea, it will sound shitty. Just curious if I can lose any of that stuff to clear up space and lose a couple lbs, or if it's an all or nothing kind of deal.2003 Imola Red M3 w/ SMG
- Likes 1
Comment
-
Currently running a SGT CSL bumper with a 1 piece carbon lip. Thinking of changing the lip from a 1 piece to the two piece splitters. I really don’t want to deal with Status Gruppe as their customer service is horrendous - Does anyone know of a quality two piece splitter option to go with? I assume you can change from a 1 piece to a two piece? Thanks in advance.2003.5 BMW M3 Carbon Schwarz Metallic/Cinnamon 6 Speed – HTE Tuning | Kassel CSL DME | AA Headers | AA Section 1 | SS Resonated Section 2 | SS Race Section 3 | TMS V2 CSL Airbox | TMS Street Plates | Ohlin’s R&T Coilovers | Ground Control Front and Rear Sways | Ground Control Adjustable Camber Arms | DMG Autosport Pro46R | FreakyParts BBK Front | Porsche 996 Conversion Rear | CMP Stage 1 + 1.5 Reinforcement Plates | CMP Subframe Bushings | CMP RTAB’s | SGT CSL Bumper | SGT CSL Trunk | Dr VANOS
Comment
Comment