What did you do for your M3 today?

[Cubieman]

Leg room mod. Nogaros put my left hip area in conflict with the more narrow than stock seat base and caused a pinch point. Pure joy with left leg now fully extended.


Sent from my iPhone using Tapatalk

Same here, I'm constantly having "pop" my left knee when driving after I installed the Nogaros, might have to try the same.


Also 0-60motorsports, if that is an OEM clamp and you have a P/N, or even it's not and you have a link I llike the idea and would like to try.

What prompted you do this and did you notice any difference in regards to less NVH?


I see that a few have gone all out and got the CAD brakets, I may do that down the line as well.

[Phoenix///M3]

Same here, I'm constantly having "pop" my left knee when driving after I installed the Nogaros, might have to try the same.


Also 0-60motorsports, if that is an OEM clamp and you have a P/N, or even it's not and you have a link I llike the idea and would like to try.

What prompted you do this and did you notice any difference in regards to less NVH?


I see that a few have gone all out and got the CAD brakets, I may do that down the line as well.

Def worth a shot. Removing the footrest assembly is about a 10 min job. Easy to try before full commit


Sent from my iPhone using Tapatalk

[Grey Phox]

Got it out of the garage and got to drive it for the first time this year. Also, now 8 weeks post op from left ankle surgery (snapped my Fibula) so it was the most normal/best feeling thing to have done in while.

[0-60motorsports]

Same here, I'm constantly having "pop" my left knee when driving after I installed the Nogaros, might have to try the same.


Also 0-60motorsports, if that is an OEM clamp and you have a P/N, or even it's not and you have a link I llike the idea and would like to try.

What prompted you do this and did you notice any difference in regards to less NVH?


I see that a few have gone all out and got the CAD brackets, I may do that down the line as well.

I have the CAD Brackets too so i'll install those next time as I need to get the hardware for them. Finally found the Part numbers, forgot I had manually ordered via the local dealer LOL.

The car sounds a bit smoother and feels a bit smoother but i'll wait and see after the CAD brackets are installed. Should make a good difference.

https://www.realoem.com/bmw/enUS/showparts?id=3C93-USA-04_2012_F80_BMW_M3&diagId=18_1090

https://www.ecstuning.com/b-genuine-bmw-parts/pipe-clamp-bottom/18307850435/

https://www.ecstuning.com/b-genuine-bmw-parts/pipe-clamp-top/18307850436/

https://www.ecstuning.com/b-genuine-bmw-parts/m8-copper-exhaust-lock-nut-priced-each/18307620549/

Thank you Bry5on for posting this info:

https://nam3forum.com/forums/forum/main-forum/member-build-journals/195928-black-tan-332it?p=294998#post294998

[SQ13]

I have the CAD Brackets too so i'll install those next time as I need to get the hardware for them. Finally found the Part numbers, forgot I had manually ordered via the local dealer LOL.

The car sounds a bit smoother and feels a bit smoother but i'll wait and see after the CAD brackets are installed. Should make a good difference.

https://www.realoem.com/bmw/enUS/showparts?id=3C93-USA-04_2012_F80_BMW_M3&diagId=18_1090

https://www.ecstuning.com/b-genuine-bmw-parts/pipe-clamp-bottom/18307850435/

https://www.ecstuning.com/b-genuine-bmw-parts/pipe-clamp-top/18307850436/

https://www.ecstuning.com/b-genuine-...h/18307620549/

Can’t believe I’m about to pay $100 for this shit bc my $5k exhaust setup rattles like a bitch. Thanks for the links!

[0-60motorsports]

Can't believe I'm about to pay $100 for this shit bc my $5k exhaust setup rattles like a bitch. Thanks for the links!

Hahaha thanks to the forum members who posted this

[Slideways]

Can’t believe I’m about to pay $100 for this shit bc my $5k exhaust setup rattles like a bitch. Thanks for the links!

On their website, they refer to V1s as the "racing" version. Typically, these are meant for cars that mostly see track time and most of those cars are loud. The owners are not going to hear any rattles over a race muffler or diff whine.

Plus, the space where the V1s mate up to the section 1 cannot utilize a flange and standard gaskets. 63.5" pipes barely fit through there as is. SS uses the same slip joint with allen bolts on the Race muffler and that thing leaks like a sieve. All the 60mm stuff is flanged with proper gaskets and the street/sport muffler doesn't have a slip fit joint like the race muffler (between the muffler chambers).

[rcsummers]

Test fitted some M2 Comp wheels for daily use.

Also in the process of un-stancing my car…..oh mistakes I made when I was younger.

Raised the front slightly after this pic was taken, and need to raise the rear this weekend.

[Tbonem3]

Leg room mod. Nogaros put my left hip area in conflict with the more narrow than stock seat base and caused a pinch point. Pure joy with left leg now fully extended.


Sent from my iPhone using Tapatalk

Might have to do this, thanks

[M3dragon]

I started it does that count LOL. Just ran it to temp