What did you do for your M3 today?

[fattycharged]

Boot and hood struts!

It's the little things, like not getting hit in the head when changing the oil…


Sent from my iPhone using Tapatalk

[Ramage]

Replaced the fuel filter on my 2004 vert, I am guessing 20 years and 85000 miles is not the typical change interval for fuel filters.

Filter build date is the same as the car...

[davidinnyc]

Bought them on eBay, E46 steering rack seal kit. You'll only need to source the three bearings, the killer is the shipping. I spent probably double on shipping than I did on the actual bearings, in hindsight I should have ordered 3 of each and just sold them to you guys so no one has to eat shipping. To put it in perspective, one of the INA bearings was $16, I ended up paying $55 for shipping from China, thanks to increased trade costs. So dumb, but I wanted the genuine stuff, Ali Baba has aftermarket bearings if you want to go with those, I was going to but shipping was the same, so what's a $10 difference really.

This is what I've done for people - I've sold them bearing sets since I've already ordered in bulk to keep inventory. The INA bearing is impossible to find genuine now as I'm pretty sure I've scoured every possible public and private source to collect as many as I can...

[Xiongbu]

This is what I've done for people - I've sold them bearing sets since I've already ordered in bulk to keep inventory. The INA bearing is impossible to find genuine now as I'm pretty sure I've scoured every possible public and private source to collect as many as I can...

How do I score an INA F-208801.4 from you?

[Acarv_426]

2 step paint correction in process followed by ceramic coating.

[saustinm3]

Didn't do it today alone, but over the course of this past month.

I've done:
All 3 bushings on my trailing arms (lemforder)
Upper and lower control arms from psm (Part Shop Max)
psm true style coilovers
new lemforder tie rods and FLCA
psm solid steering column u joint
rear sway bar clamp from psm, spl front end links
trans and diff fluid
alignment

and to top it off a set of TE37 i got for a steal on FB!

[nextlvel]

Didn't do it today alone, but over the course of this past month.

I've done:
All 3 bushings on my trailing arms (lemforder)
Upper and lower control arms from psm (Part Shop Max)
psm true style coilovers
new lemforder tie rods and FLCA
psm solid steering column u joint
rear sway bar clamp from psm, spl front end links
trans and diff fluid
alignment

and to top it off a set of TE37 i got for a steal on FB!

What's the specs on the TEs? Looks great! saustinm3

[saustinm3]

What's the specs on the TEs? Looks great! saustinm3

Thank you! They are 18x10 +25 w/ 265/35 all around, I did have to add a 5mm spacer on the front bc my inner barrel was rubbing my spring from the camber.