Announcement

Collapse
No announcement yet.

Dumb Question Thread - No Flaming Allowed

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What is the best driving style to log for a tuner's benefit?
    Last edited by Cubieman; 05-13-2021, 09:01 PM.
    2004 Silbergrau Metallic 6MT
    Karbonius/OEM Snorkel/Flap/HTE Tuned
    Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA

    OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
    RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

    2006 M6 Black Saphire SMG
    Instagram

    Comment


      Driving style? When I was tuning my STi remotely, I logged WOT pulls in 3rd gear from 2500rpm to redline. That was a enough for my tuner to get a road tune going.
      2003 BMW M3 6MT Coupe - TiAg/Black

      Comment


        Originally posted by ej257 View Post
        Driving style? When I was tuning my STi remotely, I logged WOT pulls in 3rd gear from 2500rpm to redline. That was a enough for my tuner to get a road tune going.
        I figured it would just be hard pulls to redline (like when one dynos), just wondered if they could also use regular city driving logs to help driveability.
        2004 Silbergrau Metallic 6MT
        Karbonius/OEM Snorkel/Flap/HTE Tuned
        Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA

        OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
        RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

        2006 M6 Black Saphire SMG
        Instagram

        Comment


          Anybody got a part number for the clip that holds the positive cable in the engine bay? Shown at the 4 min mark in this vid:

          Welcome to ShopLifeTV!In this video I show how to remove the intake manifold/plenum from an E46 M3 with a SMG transmission (the process is the same for 6 Spe...


          I see it on realoem but it doesn't provide a part number (#13):


          Last edited by natty99; 05-18-2021, 06:35 PM.

          Comment


            Originally posted by natty99 View Post
            Anybody got a part number for the clip that holds the positive cable in the engine bay? Shown at the 4 min mark in this vid:



            I see it on realoem but it doesn't provide a part number (#13):

            61138350836

            Comment


              Originally posted by terra View Post

              61138350836
              Thanks terra

              Comment


                I’ve been banging my head against this. Would be interested to hear how y’all would troubleshoot. I picked up new RE exhaust hangers to replace my stock ones which have never been replaced, and am installing these along with my new Supersprint Sport muffler. However, I seem to be running into a fitment issue with these hangers on this muffler. Long story short, I’m not able to get the muffler fully seated into the section 2 pipes likely due to the hangers not giving me enough clearance against the wheel well. I may try using one of the stock hangers in this position instead. Any other thoughts/tips anyone can lend me?
                Click image for larger version  Name:	2F272F0E-B6BE-4A61-89D7-022EDCD80B73.jpeg Views:	0 Size:	151.4 KB ID:	106719
                2012 E92 M3 Competition - LeMans Blue / Speed Cloth - 6MT
                [SOLD] 2004 E46 M3 Coupe - Carbon Black / Black - 6MT

                Comment


                  Originally posted by keljos View Post
                  I’ve been banging my head against this. Would be interested to hear how y’all would troubleshoot. I picked up new RE exhaust hangers to replace my stock ones which have never been replaced, and am installing these along with my new Supersprint Sport muffler. However, I seem to be running into a fitment issue with these hangers on this muffler. Long story short, I’m not able to get the muffler fully seated into the section 2 pipes likely due to the hangers not giving me enough clearance against the wheel well. I may try using one of the stock hangers in this position instead. Any other thoughts/tips anyone can lend me?
                  Click image for larger version Name:	2F272F0E-B6BE-4A61-89D7-022EDCD80B73.jpeg Views:	0 Size:	151.4 KB ID:	106719
                  What is your setup upstream of sec. 2, stock or aftermarket?

                  You may have to use OE mounts on the driver's side on the R.E. on the passenger side only. I currently run the R.E mount on the passenger side only as it keeps my SCZA muffler solid enough to not hit the EVAP canister.

                  Your issue may have to do with the R.E. mounts or just the fact that aftermarket stuff doesn't always land in the same place as factory. Too bad, as those R.E mounts are quite nice, and expensive.
                  If you ever get rid of them let me know
                  2004 Silbergrau Metallic 6MT
                  Karbonius/OEM Snorkel/Flap/HTE Tuned
                  Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA

                  OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
                  RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

                  2006 M6 Black Saphire SMG
                  Instagram

                  Comment


                    Originally posted by Cubieman View Post

                    What is your setup upstream of sec. 2, stock or aftermarket?

                    You may have to use OE mounts on the driver's side on the R.E. on the passenger side only. I currently run the R.E mount on the passenger side only as it keeps my SCZA muffler solid enough to not hit the EVAP canister.

                    Your issue may have to do with the R.E. mounts or just the fact that aftermarket stuff doesn't always land in the same place as factory. Too bad, as those R.E mounts are quite nice, and expensive.
                    If you ever get rid of them let me know
                    All currently stock except this new ss sport sec 3. Seems likely that i'll end up in a similar config and swap one or both of the hangers back to OEM on the drivers side. Thanks for your thoughts!
                    2012 E92 M3 Competition - LeMans Blue / Speed Cloth - 6MT
                    [SOLD] 2004 E46 M3 Coupe - Carbon Black / Black - 6MT

                    Comment


                      Anyone have insight on fault codes:
                      78 DSC: vehicle power > 18 V
                      B6 DSC: steering angle sensor CAN

                      Screen Shot 2021-05-26 at 2.37.01 PM by Nate Hassler, on Flickr
                      http://www.natehasslerphoto.com
                      '99 M3, Hellrot/Sand Beige, slicktop
                      '01 M3, Imola/black

                      Comment


                        Heck while we're at it... How about these? Best things to try before replacing parts...?

                        Screen Shot 2021-05-26 at 2.41.10 PM by Nate Hassler, on Flickr
                        http://www.natehasslerphoto.com
                        '99 M3, Hellrot/Sand Beige, slicktop
                        '01 M3, Imola/black

                        Comment


                          Originally posted by Nate047 View Post
                          Anyone have insight on fault codes:
                          78 DSC: vehicle power > 18 V
                          B6 DSC: steering angle sensor CAN

                          Screen Shot 2021-05-26 at 2.37.01 PM by Nate Hassler, on Flickr
                          Looks like you have a bad alternator regulator
                          Vehicle voltage should be under 15.5(about)

                          I would fix that issue first and the rest might go away

                          Start with a volt meter
                          Measure battery voltage with car off
                          Should be around 12v

                          Start car and measure battery voltage again
                          If you are reading anything above 15v you can have a bad alternator or voltage regulator (which is on the alternator)


                          Sent from my iPhone using Tapatalk

                          Comment


                            I have a 2004 M3

                            I will be installing the Karbonius intake once it arrives

                            I’m just trying to get things ready

                            My question is

                            Can I re use my boots or do I need boots from abs earlier model m3

                            Can’t really find a answer

                            I even emailed karbonius they said they don’t know the installation ???

                            And provided me with a customers email that does installs in England.


                            Sent from my iPhone using Tapatalk

                            Comment


                              Originally posted by Stack View Post

                              Looks like you have a bad alternator regulator
                              Vehicle voltage should be under 15.5(about)

                              I would fix that issue first and the rest might go away

                              Start with a volt meter
                              Measure battery voltage with car off
                              Should be around 12v

                              Start car and measure battery voltage again
                              If you are reading anything above 15v you can have a bad alternator or voltage regulator (which is on the alternator)


                              Sent from my iPhone using Tapatalk
                              Cool thanks, I replaced the alternator like 20k miles ago. Stands to reason it could be bad already?
                              Last edited by Nate047; 05-26-2021, 06:46 PM.
                              http://www.natehasslerphoto.com
                              '99 M3, Hellrot/Sand Beige, slicktop
                              '01 M3, Imola/black

                              Comment


                                Originally posted by Stack View Post
                                I have a 2004 M3

                                I will be installing the Karbonius intake once it arrives

                                I’m just trying to get things ready

                                My question is

                                Can I re use my boots or do I need boots from abs earlier model m3

                                Can’t really find a answer

                                I even emailed karbonius they said they don’t know the installation ???

                                And provided me with a customers email that does installs in England.


                                Sent from my iPhone using Tapatalk
                                10/04 production which means 05 MY and later use the new boots
                                2003.5 MT JB/B - CSL SCHRICK SUPERSPRINT EISENMANN JRZ SWIFT MILLWAY APR ENDLESS BBS/SSR DREXLER KMP SACHS RECARO AR SLON MKRS GSP DMG KARBONIUS CP AUTOSOLUTIONS KOYO

                                Comment

                                Working...
                                X