What is the best driving style to log for a tuner's benefit?
Announcement
Collapse
No announcement yet.
Dumb Question Thread - No Flaming Allowed
Collapse
This is a sticky topic.
X
X
-
Last edited by Cubieman; 05-13-2021, 09:01 PM.2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
-
Originally posted by ej257 View PostDriving style? When I was tuning my STi remotely, I logged WOT pulls in 3rd gear from 2500rpm to redline. That was a enough for my tuner to get a road tune going.2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
Comment
-
Anybody got a part number for the clip that holds the positive cable in the engine bay? Shown at the 4 min mark in this vid:
Welcome to ShopLifeTV!In this video I show how to remove the intake manifold/plenum from an E46 M3 with a SMG transmission (the process is the same for 6 Spe...
I see it on realoem but it doesn't provide a part number (#13):
Last edited by natty99; 05-18-2021, 06:35 PM.
Comment
-
Originally posted by natty99 View Post
- Likes 1
Comment
-
I’ve been banging my head against this. Would be interested to hear how y’all would troubleshoot. I picked up new RE exhaust hangers to replace my stock ones which have never been replaced, and am installing these along with my new Supersprint Sport muffler. However, I seem to be running into a fitment issue with these hangers on this muffler. Long story short, I’m not able to get the muffler fully seated into the section 2 pipes likely due to the hangers not giving me enough clearance against the wheel well. I may try using one of the stock hangers in this position instead. Any other thoughts/tips anyone can lend me?
2012 E92 M3 Competition - LeMans Blue / Speed Cloth - 6MT
[SOLD] 2004 E46 M3 Coupe - Carbon Black / Black - 6MT
Comment
-
Originally posted by keljos View PostI’ve been banging my head against this. Would be interested to hear how y’all would troubleshoot. I picked up new RE exhaust hangers to replace my stock ones which have never been replaced, and am installing these along with my new Supersprint Sport muffler. However, I seem to be running into a fitment issue with these hangers on this muffler. Long story short, I’m not able to get the muffler fully seated into the section 2 pipes likely due to the hangers not giving me enough clearance against the wheel well. I may try using one of the stock hangers in this position instead. Any other thoughts/tips anyone can lend me?
You may have to use OE mounts on the driver's side on the R.E. on the passenger side only. I currently run the R.E mount on the passenger side only as it keeps my SCZA muffler solid enough to not hit the EVAP canister.
Your issue may have to do with the R.E. mounts or just the fact that aftermarket stuff doesn't always land in the same place as factory. Too bad, as those R.E mounts are quite nice, and expensive.
If you ever get rid of them let me know2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
Comment
-
Originally posted by Cubieman View Post
What is your setup upstream of sec. 2, stock or aftermarket?
You may have to use OE mounts on the driver's side on the R.E. on the passenger side only. I currently run the R.E mount on the passenger side only as it keeps my SCZA muffler solid enough to not hit the EVAP canister.
Your issue may have to do with the R.E. mounts or just the fact that aftermarket stuff doesn't always land in the same place as factory. Too bad, as those R.E mounts are quite nice, and expensive.
If you ever get rid of them let me know2012 E92 M3 Competition - LeMans Blue / Speed Cloth - 6MT
[SOLD] 2004 E46 M3 Coupe - Carbon Black / Black - 6MT
Comment
-
Anyone have insight on fault codes:
78 DSC: vehicle power > 18 V
B6 DSC: steering angle sensor CAN
Screen Shot 2021-05-26 at 2.37.01 PM by Nate Hassler, on Flickr
Comment
-
Heck while we're at it... How about these? Best things to try before replacing parts...?
Screen Shot 2021-05-26 at 2.41.10 PM by Nate Hassler, on Flickr
Comment
-
Originally posted by Nate047 View PostAnyone have insight on fault codes:
78 DSC: vehicle power > 18 V
B6 DSC: steering angle sensor CAN
Screen Shot 2021-05-26 at 2.37.01 PM by Nate Hassler, on Flickr
Vehicle voltage should be under 15.5(about)
I would fix that issue first and the rest might go away
Start with a volt meter
Measure battery voltage with car off
Should be around 12v
Start car and measure battery voltage again
If you are reading anything above 15v you can have a bad alternator or voltage regulator (which is on the alternator)
Sent from my iPhone using Tapatalk
Comment
-
I have a 2004 M3
I will be installing the Karbonius intake once it arrives
I’m just trying to get things ready
My question is
Can I re use my boots or do I need boots from abs earlier model m3
Can’t really find a answer
I even emailed karbonius they said they don’t know the installation ???
And provided me with a customers email that does installs in England.
Sent from my iPhone using Tapatalk
Comment
-
Originally posted by Stack View Post
Looks like you have a bad alternator regulator
Vehicle voltage should be under 15.5(about)
I would fix that issue first and the rest might go away
Start with a volt meter
Measure battery voltage with car off
Should be around 12v
Start car and measure battery voltage again
If you are reading anything above 15v you can have a bad alternator or voltage regulator (which is on the alternator)
Sent from my iPhone using TapatalkLast edited by Nate047; 05-26-2021, 06:46 PM.
Comment
-
Originally posted by Stack View PostI have a 2004 M3
I will be installing the Karbonius intake once it arrives
I’m just trying to get things ready
My question is
Can I re use my boots or do I need boots from abs earlier model m3
Can’t really find a answer
I even emailed karbonius they said they don’t know the installation ???
And provided me with a customers email that does installs in England.
Sent from my iPhone using Tapatalk2003.5 MT JB/B - CSL SCHRICK SUPERSPRINT EISENMANN JRZ SWIFT MILLWAY APR ENDLESS BBS/SSR DREXLER KMP SACHS RECARO AR SLON MKRS GSP DMG KARBONIUS CP AUTOSOLUTIONS KOYO
Comment
Comment