What did you do for your M3 today?

[sapote]

I kinda went all in 😅
big 3 and everything around it

Are the bearing at 84K miles? Look not bad.
I would not be happy to see the heavy output shafts loading on the CV joint balls and can cause dinted surfaces and noise. They should be supported.

[FCD46]

I notice you're running both resonated sections. I started off just running the resonated section 2, and I ordered the resonated section 1 last night. I was planning to run the straight section 2 with it though... do you have any sound clips?

I don’t have any sound clips other than recorded from inside the car.. I’ll make an effort to record some this weekend though and post here.

I was running a straight SS sec1 and straight SS sec2 on a SG SCZA sec3 and it had a lot of rasp I wasn’t a fan of. Sounded great inside the car but I let a friend drive mine while I drove his M and realized outside the car it’s bees in a tin can so I made the switch to sec1 resonated and sec2 also resonated. During the groupbuy setup by euroconnex sec2 resonated was the only option. I too would be interested to hear a straight sec2 as now it’s a great sound quality but little tamed total volume.. I want it louder but with the same tone currently if possible.


Correct, 044022 is the sec1 I have which yes is 63.5 resonated as mentioned above

[9kracing]

LOL, I did the same thing almost.

I originally ordered straight section1, and resonated section 2. Well, my section 2 showed up with a broken piece rattling around inside. So, I started an RMA, and in the meantime I ordered the straight section 2 to run temporarily. With the 2 straight sections and the Dinan muffler it sounds great, volume is perfect, but is super raspy like you said. So I just ordered the resonated section 1, and when my section 2 finally gets warrantied I'll decide then if I keep the straight section 2 or go back to the resonated section. I too want it loud, I put 2k miles on this car in the last 2 years, I can deal with a loud exhaust.

[FCD46]

LOL, I did the same thing almost.

I too want it loud, I put 2k miles on this car in the last 2 years, I can deal with a loud exhaust.

We’re on the same boat, I’ve had mine 7yrs and put maybe 10k miles.. 3k of which came from driving Dallas to TN for Mvading the Dragon’s 3 day event and the drive back of course. This year I trailered it there so only added 1k miles during the event lol

[cobra]

Windshield wiper delete + threaded wiper delete caps.

Why!?

[slavik1988]

What is the make/model/cost?

Sent from my SM-T220 using Tapatalk

It is the YFCM Composite Driveshaft. I got in during the group buy at $1750. Now they are over $2k.

https://euroconnex.co/collections/e46-must-haves/products/e46m3-carbon-fiber-driveshaft-yfcm-v2?variant=43674925760762

[Tbonem3]

Why!?

Because we can

[c watson]

+1 for a windshield wiper delete. I also did a registration sticker delete. I have my registration laminated and I leave it on the dashboard when I park 👍

[TexaZ3]

Because we can

Well, doesn't mean we should

[bagger]

Oh that wiper delete is tempting. But I just got all new wiper control arms and they sure look nice when they aren't all beat up. Refreshing those is a decent alternative to a delete.

[Tbonem3]

Well, doesn't mean we should

Not with Texas' extreme weather maybe

[PSUEng]

That wiper delete is so clean...

[maupineda]

Got a new steering wheel for my M Coupe


Shameless plug: My current one is up now for sale

[maw1124]

That wiper delete is so clean...

Stop it! Mind the children. People obviously don’t need encouragement.

Got a new steering wheel for my M Coupe

New OEM? If so, well done. What does your old one look like (PM me) and let us know if you think it was worth it. I just put new faces on mine, leather and stitching are fine.

Cheers,

maw

[maupineda]

New OEM? If so, well done. What does your old one look like (PM me) and let us know if you think it was worth it. I just put new faces on mine, leather and stitching are fine.

Cheers,

maw

Yes, new OEM . The old one does not look bad at all. here is how the old one looks. Not bad at all, but is tough to bit new original quality.