Search Result

[DanAvoN7]

BMW makes a 24mm socket for alternator pulley removal/installation. It's fairly cheap too. Part number 83300491167...

[DanAvoN7]

Bimmerworld TrackCAB are not poly. The insert is made of delrin....

[DanAvoN7]

You will be fine with your current setup and you will not need to short shift between turn 5 and 6.

My previous exhaust setup was catless...

[DanAvoN7]

The Beisan Systems Exhaust Upper Chain Guide is a replacement for the factory upper chain guide. The factory upper guide does not have any oil holes....

[DanAvoN7]

Has the oil pan drain ever been repaired? I've seen a couple cars in which a Time-Sert thread repair was done by a shop to repair a stripped drain and...

[DanAvoN7]

This is normal after the vanos has been removed from the car and cleared of oil. There is air in the vanos system once it is opened and in the first few...

[DanAvoN7]

I would be interested in a 5spd swap length CF driveshaft. On m3forum there was a similar thread and there was interest for a 5spd swap length driveshaft...

[DanAvoN7]

I charge right ~$1K in labor to perform a rod bearing service which includes replacement of engine mounts, steering coupler, power steering fluid flush,...

[DanAvoN7]

INA manufactures the belt drive components for BMW and Continental manufactures the belts for BMW. All parts are available as OEM parts from these manufactures...

[DanAvoN7]

The factory S54 oil pump has a regulated pressure of 4 bar (58 psi). On cold start idle oil pressure will be ~3.52 bar (52 psi) and when driving at higher...

[DanAvoN7]

Any adjustable end link will not work. Not all suspensions have the same shock body length, end link bracket location, etc. and so you need a specific...

[DanAvoN7]

You guys are getting mixed up based on the incorrect UUC image and Inizes picture above in which the hangers have rotated. If you look closer you will...

[DanAvoN7]

On 99% of vanos overhauls (unless a customer requests a different line) I install the revised Genuine OE BMW vanos oil line. I always suggest this part...

[DanAvoN7]

When making tighter turns it will sound like a bit of a groan and you will physically feel it locking/unlocking as the car is moving. It's a slip stick...

[DanAvoN7]

Definitely get under the car and take a look at the engine mounts. If you are unsure if they are worn or not try and take a clear picture from a couple...